UNINSTALLING RAPTOR
5.1 Uninstalling Raptor Drivers
To remove the Raptor Drivers for HP-UX from the system, follow
the steps below carefully:
NOTE: If you have a previous version of Raptor Drivers, please
use the uninstall procedure provided with that software.
1. Login as root.
2. Type: /usr/sbin/swremove.
Using the arrow keys, move the cursor down to the desired
package and select that package by pressing the spacebar. For
HP-UX 10.20 this package could be TSIRDHPUX_10 or
TSIFTHPUX_10 depending on the type of Raptor card installed.
For HP-UX 11.0 this package could be TSIRDHPUX_11 or
TSIFTHPUX_11, again depending on the type of Raptor card
installed. For HP-UX 11i this package is TSIFTHPUX_11i. If
several packages have been installed on the target system, the
target package may not be immediately visible.
necessary to scroll down through a long list to find it.
packages are listed alphabetically.
3. Press <tab> to activate the menu bar.
4. Move the cursor over to Actions and press <Enter>.
Chapter 5
DRIVERS FOR HP-UX
5-1
It may be
The
Need help?
Do you have a question about the RAPTOR 1100T - DRIVERS FOR HP-UX INSTALLATION-REFERENCE and is the answer not in the manual?