Advertisement
Quick Links
Advertisement
Related Manuals for GCAN GC-3814
Summary of Contents for GCAN GC-3814
- Page 1 GC-3814 4-channel PT1000 input module (RTD) User manual Document version V1.01（2022/03/15）...
- Page 2 Vhandy technology GC-3814 user manual Revision History Version Date Reason V1.00 2022/01/12 Create documentation V1.01 2022/03/15 Add IO module selection table...
- Page 3 2. Installation ....................... 5 2.1 Module fixing ....................5 2.2 Wiring method ....................5 2.3 System status indicator .................. 7 2.4 Combined with GCAN-PLC-400/510/511 series .......... 7 2.5 Combined with GCAN- 8000 series ..............8 3. Technical Specifications ..................9 4. Disclaimer ......................10 5.
- Page 4 1. Introduction 1.1 Overview The GC-3814 module is an I/O module that integrates 4 temperature sensor (PT1000) input channels. This module can be used to collect temperature information in real time and send the collected values to GCAN-PLC-400/510/511 or GCAN-8000/8100 series couplers through the internal bus.
- Page 5 2. Installation This chapter will describe the installation method, wiring method, meaning of the indicator and meaning of the interface of the GC-3814 module. 2.1 Module fixing The installation method of GC-3814 module as shown in Figure 2.1 and a flat-blade screwdriver is needed for auxiliary installation.
- Page 6 Vhandy technology GC-3814 user manual Figure 2.2 Wiring method of GC-3814 module Figure 2.3 GC-3814 Module terminal block...
- Page 7 Vhandy technology GC-3814 user manual The wiring terminal block of the GC-3814 module is shown in Figure 2.3. GC-3814 contains 4 sets of input points, which can connect up to 4 PT1000 sensors. The serial numbers corresponding to each terminal and their meanings are shown in Table 2.1.
- Page 8 For example: the node number of the GCAN-IO-8000 module is 1, the input status of channel 1 of the first GC-3814 module is 26°C, and the input status of other channels is not connected to the sensor, then the GCAN-IO-8000 module...
- Page 9 Vhandy technology GC-3814 user manual 3. Technical Specifications Wiring method Wiring method 2-wire Interface characteristics Input point number Sensor type PT1000 Measuring temperature range -200~+500℃ Measurement resolution 0.1°C/digit Conversion time ＜250ms Measuring current flow 0.5mA Measurement error <±2℃ Power supply...
- Page 10 Vhandy technology GC-3814 user manual 4. Disclaimer Thank you for purchasing GCAN's GCAN series of hardware and software products. GCAN is a registered trademark of Shenyang Vhandy Technology Co., Ltd. This product and manual are copyrighted by Vhandy Technology. Without permission, it is not allowed to reproduce in any form.
- Page 11 Vhandy technology GC-3814 user manual 5. Module selection table GCAN-PLC-400 series products consist of a programmable main control module, several GC series IO modules and a terminal resistance module. GC series IO modules currently include five categories: digital input, digital output, analog input, analog output, and communication extension.
- Page 12 Vhandy technology GC-3814 user manual GC-3844/3854/3 K type / S type / T type Thermocouple 4-channel thermocouple GC-4602 Voltage output, 16 bits -5V~+5V 2-channel GC-4622 Voltage output, 16 bits -10V~+10V 2-channel GC-4642 Current output, 16 bits 0-20mA 2-channel Analog GC-4652...
- Page 13 Vhandy technology GC-3814 user manual Sales and service Shenyang Vhandy Technology Co., Ltd. Address: Room 401, D11 Block, SISP., Hunnan District, Shenyang, Liaoning, China E-mail: info@gcanbus.com Tel/ Whatsapp: +86-13644001762 Website: gcanbus.com...
Need help?
Do you have a question about the GC-3814 and is the answer not in the manual?
Questions and answers