Displaying Screen; Adjusting Speaker Volume; Adjusting Brightness - Eizo FLEXSCAN S1961 Setup Manual

Prior to use

Displaying Screen

1
Press to turn on the monitor. Turn on the PC.
The monitor's Power indicator lights up blue and the screen image appears.
2
When turning on the monitor and PC for the fi rst time with the analog signal, the
Auto Adjustment function works to adjust the clock, phase, and display position
automatically.
When using the digital signal, the images are displayed correctly based on the preset data of the
monitor.
Attention
• During Auto Adjustment function "Auto in progress" appears.
• Turn off the monitor and PC after using them. Unplugging the power cord completely shuts off power
supply to the monitor.

Adjusting Speaker Volume

1
Press or .
The speaker volume adjustment screen appears.
2
Adjust the speaker volume with

Adjusting Brightness

In case of the Speaker applied model
1
Press or .
The brightness adjustment screen appears.
2
Adjust the brightness with
Press to increase screen brightness or press
to decrease.
3
Press at the desired brightness.
The specifi ed brightness is saved.
Installation Setting/Adjustment
or .
or .
Troubleshooting
Speaker volume adjustment screen
Brightness adjustment window
5