Do you have a question about the CA74177 and is the answer not in the manual?
Questions and answers
david
July 12, 2025
do you have to leave the adapter in all the time
1 comments:
Mr. Anderson
August 30, 2025
Yes, the La Crosse Technology CA74177 adapter needs to be left plugged in all the time. The plug serves as the disconnect device, and the socket-outlet must be installed near the equipment and be easily accessible.
This answer is automatically generated
Diane Branconier
February 26, 2025
I cannot find the set button
1 comments:
Mr. Anderson
May 14, 2025
The SET button is located on the top of the La Crosse Technology CA74177 weather station.
This answer is automatically generated
Diane Branconier
February 26, 2025
No need for a phone call, I found the button. Thank you.
andre
February 18, 2025
how do you set the presure numbers
1 comments:
Mr. Anderson
February 18, 2025
To set the pressure numbers on the La Crosse Technology CA74177:
1. Select HPA. 2. Press the SET button to confirm and move to adjust the pressure number. "PRESSURE" will be displayed, and the pressure number will flash. 3. Press the "+" or "-" button to adjust the pressure number. 4. Press SET to confirm. 5. "THANK YOU" will be displayed for 2 seconds, then the station will exit the setting menu.
If no button is pressed for 10 seconds, the station will return to the normal time display.
Seasonal Foliage Search for Outdoor Sensor Pressure History Graph Extra Sensor Area Pressure Number Low Battery Indicators Weather Station Forecast Icons CA74177 Moon Phase Outdoor Sensor TX141TH-Bv4 Insulation Tab Power Up Power Jack Insert 2-AA batteries into your Outdoor Sensor.
Settings Menu Hold the button until the LCD changes to enter the Settings Menu. Press and release the button to adjust values. Press and release the button to confirm values and move to the next setting. Press and release the LIGHT button at any time to save and exit.
Auto-Dim Settings Program your display to automatically dim during preselected times. Hold the LIGHT button until the display changes to enter the Auto-Dim Settings Menu. Press and release the button to turn the Auto-Dim feature on or off. Press and release the LIGHT button to confirm.
Pressure History Graph • Read from left to right, the Pressure History Graph indicates the rise and fall in air pressure over the past 24 hours. • The “0 Hr” on the horizontal axis indicates the current hour air pressure. •...
Moon Phase The moon phase is based on the Lunar Small Waxing Large Waxing First Small Waxing Large Waxing Calendar and the year, month, and date Moon Crescent Crescent Quarter Gibbous Gibbous settings. Full Large Waning Small Waning Last Large Waning Small Waning Moon Gibbous...
History Records Press and release the HISTORY button from the normal time display to toggle through your indoor/outdoor temperature and humidity records with time and date stamps. Records Viewing Order • Outdoor High Temperature BAROMETRIC PRESSURE • Outdoor Low Temperature •...
Customizable Alerts Setting Custom Alerts Hold the ALERTS button until the display changes to enter the Alert Settings Menu. Press and release the buttons to activate/deactivate and adjust alert settings. Press ALERTS to confirm your selection. Your programmed alerts are active when the and the icon appear on the LCD.
Search for Outdoor Sensor If you are seeing “NO” or dashes for your outdoor readings, please try the following steps: Hold the TEMP button to search for the outdoor sensor. The Reception Indicator will begin to animate. If after 3 minutes the sensor still isn’t connected, bring the sensor inside, install fresh batteries, then hold the RESET button to restart the station.
Stay in Touch! Ask questions, watch set up videos, and provide feedback on our social media outlets. Follow La Crosse Technology on Youtube, Facebook, Instagram, and X (Twitter). Canada Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Warranty & Patents La Crosse Technology, Ltd. provides a 1-year limited time Scan Here warranty (from date of purchase) on this product relating to For Information manufacturing defects in materials and workmanship. Self-help: bit.ly/ca74177_support Before returning a product, please contact our friendly customer support with questions: Springfield Instruments Inc.
Page 12
6.62-Inches 8.31-Inches 16.82cm 21.10cm - Maintenir pour accéder au menu de réglage de l'heure et de la date - Appuyer pour régler la luminosité ; maintenir pour accéder aux réglages de l'auto-dim. 3.62-Inches 9.20cm 6.34-Inches 16.10cm - Press to view indoor & outdoor, high &...
Page 13
• INGESTION HAZARD: This product contains a button cell or coin battery. • DEATH or serious injury can occur if ingested. • A swallowed button cell or coin battery can cause Internal Chemical Burns in as little as 2 hours. •...
1. Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential perforation of the esophagus. 2. If you suspect your child has swallowed or inserted a coin cell battery, immediatley seek urgent medical assistance.
Page 15
Station météorologique en couleur sans fil GUIDE DE CONFIGURATION MODÈLE: CA74177...
Entretien et maintenance Avertissements personnalisables Graphique de l’historique des Rechercher un capteur pressions Zone de capteur supplémentaire Indication de la pression Weather Station CA74177 Icône de batterie faible Symboles des prévisions Phase de lune Outdoor Sensor TX141TH-Bv4 Insulation Tab Power Jack Mise en route Insérez 2 piles AA dans votre capteur extérieur.
Menu des paramètres Appuyez sur le bouton jusqu’à ce que l’écran ACL change pour accéder au menu des paramètres. Appuyez sur le bouton + ou - et relâchez-le pour régler des valeurs. Appuyez sur le bouton et relâchez-le pour confirmer les valeurs, puis passez au paramètre suivant.
Paramètres de gradation automatique Programmez l’écran pour qu’il s’assombrisse automatiquement à des heures définies à l’avance. Appuyez sur le bouton LIGHT jusqu’à ce que l’écran ACL change pour accéder au menu des paramètres de gradation automatique. Appuyez sur le bouton + ou - et relâchez-le pour activer ou désactiver la fonction de gradation automatique.
Graphique de l’historique des pressions • Le graphique historique des pressions se lit de gauche à droite et indique les hausses et les baisses de la pression atmosphérique au cours des dernières 24 heures. • La valeur « 0 Hr » présentée sur l’axe horizontal indique la pression atmosphérique de l’heure actuelle.
Phase de lune La phase de lune dépend du calendrier lunaire Small Waxing Large Waxing First Small Waxing Large Waxing et des paramètres associés à l’année, au mois Moon Crescent Crescent Quarter Gibbous Gibbous et à la date. Full Large Waning Small Waning Last Large Waning...
Historique des relevés Sur l’écran d’affichage de l’heure standard, appuyez sur le bouton HISTORY et relâchez-le pour alterner entre des valeurs de température et d’humidité intérieures/extérieures avec l’heure et la date. Ordre d’affichage des valeurs • Température extérieure maximale BAROMETRIC PRESSURE •...
Avertissements personnalisables Paramétrer des avertissements personnalisés Appuyez sur le bouton ALERTS jusqu’à ce que BAROMETRIC PRESSURE l’écran change pour accéder au menu des paramètres d’avertissement. HUMIDITY HUMIDITY 2. Appuyez sur le bouton et relâchez-le pour activer ou MOON PHASE COMFORT LEVEL désactiver et régler les paramètres d’avertissement.
Rechercher un capteur extérieur Si vous lisez l’inscription « NO » ou constatez des pointillés à la place de vos valeurs extérieures, veuillez suivre les étapes ci-dessous : Appuyez en continu sur le bouton TEMP pour rechercher le capteur extérieur. Le signal de réception ( ) commence à...
Restez en contact ! Posez des questions, regardez des vidéos d’installation et donnez votre avis sur nos médias sociaux. Suivez La Crosse Technology sur Youtube, Facebook, Instagram et X (Twitter). Déclaration pour le Canada Cet appareil contient un (des) émetteur(s)/récepteur(s) exempté(s) de licence qui est (sont) conforme(s) au(x) CNR exempté(s) de licence du ministère de l’Innovation, des Sciences et du Développement...
Garantie et brevets Scan Here La Crosse Technology, Ltd. offre une garantie limitée d’un an (à compter de la date d’achat) sur ce produit en ce qui concerne les For Information défauts de fabrication et de main-d’oeuvre. bit.ly/ca74177_support Aide personnelle : Avant de retourner un produit, veuillez contacter notre service cli- entèle pour toute question :...
6.62-Inches 8.31-Inches 16.82cm 21.10cm - Maintenir pour accéder au menu de réglage de l'heure et de la date - Appuyer pour régler la luminosité ; maintenir pour accéder aux réglages de l'auto-dim. 3.62-Inches 9.20cm 6.34-Inches 16.10cm - Press to view indoor & outdoor, high &...
Page 27
AVERTISSEMENT • RISQUE D’INGESTION : Ce produit contient une pile de type bouton ou de type pièce de monnaie. • L’ingestion de ce produit peut entraîner la MORT ou des blessures graves. • Une pile de type bouton ou de type pièce de monnaie qui est ingérée peut provoquer des brûlures chimiques internes en l’espace de 2 heures seulement.
AVERTISSEMENT : GARDER HORS DE LA PORTÉE DES ENFANTS. 1. Une ingestion peut causer des lésions graves en l’espace de deux heures seulement, voire la mort, en raison de brûlures chimiques et d’une perforation possible de l’œsophage. 2. Lorsqu’on pense qu’un enfant a avalé ou incorporé une pile de type pièce de monnaie, il faut rechercher immédiatement une assistance médicale d’urgence.
Need help?
Do you have a question about the CA74177 and is the answer not in the manual?
Questions and answers
do you have to leave the adapter in all the time
Yes, the La Crosse Technology CA74177 adapter needs to be left plugged in all the time. The plug serves as the disconnect device, and the socket-outlet must be installed near the equipment and be easily accessible.
This answer is automatically generated
I cannot find the set button
The SET button is located on the top of the La Crosse Technology CA74177 weather station.
This answer is automatically generated
No need for a phone call, I found the button. Thank you.
how do you set the presure numbers
To set the pressure numbers on the La Crosse Technology CA74177:
1. Select HPA.
2. Press the SET button to confirm and move to adjust the pressure number. "PRESSURE" will be displayed, and the pressure number will flash.
3. Press the "+" or "-" button to adjust the pressure number.
4. Press SET to confirm.
5. "THANK YOU" will be displayed for 2 seconds, then the station will exit the setting menu.
If no button is pressed for 10 seconds, the station will return to the normal time display.
This answer is automatically generated