Symbol Meaning; Safety Alert Symbol; Safety Instructions - Ego Power+ HTA2000S Operator's Manual

READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
WARNING:
To ensure safety and reliability, all repairs
and replacements should be performed by a qualified
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident
prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER", "WARNING",
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.

SYMBOL MEANING

SAFETY ALERT SYMBOL:

WARNING, OR CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
tools can result in foreign objects being
thrown into your eyes, which can result in
severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety
glasses with side shields and a full face shield when
needed. We recommend a Wide Vision Safety Mask for
use over eyeglasses or standard safety glasses with side
shields.

SAFETY INSTRUCTIONS

This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow all
instructions on the machine before attempting to assemble
and operate it.
Indicates DANGER,
The operation of any power
SHORT POLE HEDGE TRIMMER ATTACHMENT — HTA2000S
Safety Alert
Read
Operator's
Manual
Wear Eye
and Head
Protection
Wear Ear
Protection
Keep hands
and feet
away from
the cutting
tool
Keep
sufficient
distance
away from
electrical
power lines
XX
Noise
WEEE
IPX4 IP Symbol
Precautions that involve
your safety.
To reduce the risk of injury,
user must read and
understand operator's
manual before using this
product.
Always wear safety
goggles or safety glasses
with side shields and a full
face shield when operating
this product. Wear an
approved safety hard hat
to protect your head.
Always wear ear
protection when operating
this product.
Never attempt to operate
your power tool with one
hand. Loss of control of
the power tool resulting
in serious or fatal injury
may result. To reduce the
risk of cut injuries, keep
hands and feet away from
the cutting tool. Never
attach a moving cutting
tool with your hand or any
other part of your body.
Ensure that keep
sufficient distance away
from electrical power
lines when operating this
product.
Guaranteed sound power
level.
Waste electrical products
should not be disposed
of with household waste.
Take to an authorized
recycler.
Protection against ingress
of water degree 4
5