Advertisement
Quick Links
HEDGE TRIMMER ATTACHMENT
FOR USE ONLY WITH THE 56V LITHIUM-ION
POWER HEAD PH1400E\PH1420E
OPERATOR'S MANUAL
HEDGE TRIMMER ATTACHMENT
MODEL NUMBER HTA2000S
WARNING: To reduce the risk of injury, the user must read and understand the
Operator's Manual before using this product. Save these instructions for future reference.
MNL_EGO_HTA2000S_AV02.01_230413
Advertisement
Related Manuals for Ego Power+ HTA2000S
Summary of Contents for Ego Power+ HTA2000S
- Page 1 FOR USE ONLY WITH THE 56V LITHIUM-ION POWER HEAD PH1400E\PH1420E OPERATOR'S MANUAL HEDGE TRIMMER ATTACHMENT MODEL NUMBER HTA2000S WARNING: To reduce the risk of injury, the user must read and understand the Operator’s Manual before using this product. Save these instructions for future reference. MNL_EGO_HTA2000S_AV02.01_230413...
- Page 2 1. Cutting Blade 2. Quadrant 3. Trigger 4. Hedge Trimmer Shaft 7. Gear Case 6. Adjusting Lever 5. End Cap 9. Blade Scabbard 8. Wrench...
- Page 3 Quadrant 45° 97° Locking Pin Top Cut Position Side Cut Position 0-10˚ 0-10˚...
-
Page 5: Symbol Meaning
Read, understand, and follow all WEEE of with household waste. instructions on the machine before attempting to assemble Take to an authorized and operate it. recycler. Protection against ingress IPX4 IP Symbol of water degree 4 SHORT POLE HEDGE TRIMMER ATTACHMENT — HTA2000S... -
Page 6: Important Safety Instructions
◾ Hold the hedge trimmer by insulated gripping surfaces only, because the blade may contact hidden wiring. Blades contacting a “live” wire may SHORT POLE HEDGE TRIMMER ATTACHMENT — HTA2000S... -
Page 7: Specifications
Any such alteration or modification is instructions to them to prevent misuse of the product misuse and could result in a hazardous condition leading and possible injury. to possibly serious personal injury. SHORT POLE HEDGE TRIMMER ATTACHMENT — HTA2000S... -
Page 8: Operation
Do not wear short HEAD” section in the power head PH1400E\PH1420E pants or sandals or go barefoot. operator’s manual to remove the hedge trimmer from the power head. SHORT POLE HEDGE TRIMMER ATTACHMENT — HTA2000S... -
Page 9: General Maintenance
To minimize the risk of accidents, work in such positions for short periods only. Set angle of adjustable cutting head to maximum so that the tool can be held in SHORT POLE HEDGE TRIMMER ATTACHMENT — HTA2000S... -
Page 10: Lubricating The Blade
◾ Store the unit in a dry, well-ventilated area, locked-up or up high, out of the reach of children. Do not store the unit on or adjacent to fertilizers, gasoline, or other chemicals. SHORT POLE HEDGE TRIMMER ATTACHMENT — HTA2000S... -
Page 11: Troubleshooting
Replace with a new blade or support. noise. Contact EGO service center for blade or support replacement. ◾ ◾ Loose blade bolts. Tighten the blade bolts. Using a wrench, (not included), turn the bolt clockwise to tighten. SHORT POLE HEDGE TRIMMER ATTACHMENT — HTA2000S... -
Page 12: Warranty Policy
Chervon Australia Pty Ltd, Unit 14, 5 Kelletts Rd, Rowville, VIC. 3178. Ph Australia; 1300 000 346. Email: support@egopowerplus.com.au Chervon New Zealand Subsidiary Ltd, 4th Floor, Smith & Caughey Building, 253 Queen St, Auckland, 1141. Ph New Zealand; 0508 000 346. Email: support@egopowerplus.co.nz SHORT POLE HEDGE TRIMMER ATTACHMENT — HTA2000S... - Page 13 Commercial Tools: LBX6000, BCX3800, STX3800, HTX7500, CSX3000, PPX1000, PSX2500, PTX5100, BHX1001, STX4500, 5 years 2 years BCX4500, EDX2000, HTX5300-P, HTX5300-PA, LBPX8000 Commercial Backpack Battery: BAX1501 3 years 2 years Commercial Charger: CHX5500E 3 years 2 years SHORT POLE HEDGE TRIMMER ATTACHMENT — HTA2000S...
Need help?
Do you have a question about the HTA2000S and is the answer not in the manual?
Questions and answers