Soundcore P30i Manual

APP

Download the soundcore app to experience Adaptive Noise Cancelling, Find Earbuds, dual connections, firmware updates, and more exciting features.

If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.
Click this link to download: http://dl-soundcore.soundcore.com/qcdl?flow=soundcore

WEARING

Choose the ear tips that fit your ears best and take a fit test in the soundcore app to ensure you get the best ANC performance.

Note: Medium ear tips come attached to the earbuds.
* Dust, earwax, or other debris can accumulate in the earbuds. To maintain optimal sound quality, regularly clean your earbuds by using a cotton swab slightly moistened with rubbing alcohol to gently wipe the metal mesh filter under the rubber ear tips.

USING THE PHONE HOLDER

The charging case can also be used as a mobile phone holder.
Unfold the phone holder as shown. Then you can place your phone on the holder.

POWERING ON AND PAIRING

1. Peel off the protective film on the earbuds.
2. Return the earbuds to the charging case and close the case. Then reopen the charging case.
3. Take out the earbuds. The earbuds will automatically power on and enter pairing mode. Select "soundcore P30i" from your device's Bluetooth list.

* When taken out, the earbuds will automatically power off after 30 minutes if they are not connected. The duration can be set in the soundcore app.

PAIRING WITH A NEW DEVICE

To pair with a new device, press and hold the touch areas of both earbuds simultaneously for 3 seconds to enter pairing mode.

CHARGING

1. Place the earbuds in the charging case and close it.
   
   • Fully dry off the earbuds and the USB-C charging port before charging.
2. Connect the charging case to a power supply by using the provided USB-C charging cable.
   

* A full battery recharge takes about 2.5 hours and 10 minutes of charging offers 2 hours of playtime.

DUAL CONNECTIONS

To connect the earbuds with two Bluetooth devices at the same time, first open the soundcore app, go to settings, and select Dual Connections > Enable Dual Connections > Connect New Device.

CONTROLS

×2: Tap twice
2s: Tap and hold for 2 seconds
*You can also customize controls in the soundcore app.

		TWS mode	Mono mode
	Switch ambient sound modes (ANC/Transparency/Normal)	Tap and hold for 2 seconds (L/R)	Tap and hold for 2 seconds
	Play/Pause	Tap twice (R)	Tap twice
	Next track	Tap twice (L)	/
	Answer a call	Tap twice (L/R)	Tap twice
	Reject/end a call	Tap and hold for 2 seconds (L/R)	Tap and hold for 2 seconds

POWERING OFF

To power off, return the earbuds to the charging case.

RESET

Open the charging case and take out the earbuds, then press and hold the touch areas of both earbuds simultaneously for 10 seconds to reset.

FIRMWARE UPDATE

You will be informed once a new firmware version is detected when you connect the earbuds to the app. Ensure the earbuds are outside the charging case until the firmware update is complete. During the update, avoid any usage.

SPECS

Specifications are subject to change without notice.

Customer Service

service@soundcore.com
support.mea@soundcore.com (For Middle East and Africa Only)
support@anker.com (日本)
+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)
+49 (0) 69 9579 7960 (DE)
03 4455 7823 ( 日本中国한국)
+86 400 0550 036 (中国)
+82 02-1661-9246 (한국)
+971 529750842 (Middle East & Africa)
+971 8000320817 (UAE)
+966 8008500030 (KSA)
+965 22069086 (Kuwait)
+20 8000000826 (Egypt)
+61 3 8331 4800 (Australia)
+90 (850) 460 14 14 (Türkiye)
+8 (800) 511-86-23 (Russia)
+91 18003138831 (India)