Soundcore Sleep A10 Manual

APP

Download the soundcore app to customize controls, listen to soothing sounds, manage your sleep, update firmware, and explore more. If your earbuds cannot connect with the soundcore app, update it to the latest version in your mobile app store.

WEARING

Choose the ear tips and ear wings that fit your ears best.

Twist the earbuds until the ear wings are wedged against the ridge of your ears.

CHARGING

1. Place the earbuds in the charging case and close it.

• Fully dry off the earbuds and the USB charging port before charging.
  

2. Connect the charging case to the power supply by using an original or certified USB-C charging cable.

• It is recommended that you charge the earbuds with a 5V charger (not included).
• Fully charge both the earbuds and the charging case before the first use

POWERING ON & PAIRING

Open the charging case, the earbuds will automatically power on and enter pairing mode.

Select "soundcore Sleep A10" on your device's Bluetooth list to connect.

RE-PAIRING

Pairing with another device: Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 3 seconds to enter pairing mode.

SELECTING LISTENING MODE

You can switch between Music Mode and Sleep Mode via the soundcore app or by tapping the left earbud twice.

• Music Mode: Play soothing sounds from soundcore app, or connect to your favorite apps for more audio content.
• Sleep Mode: Listen to the soothing sounds downloaded onto your earbuds without having to interact with apps.
  

ADAPTIVE NOISE MASKING

Sleep A10 adopts noise masking instead of noise cancelling. Noise masking covers up noise with selected sounds, while noise cancelling offsets noise using sound waves.

You can enable Adaptive Noise Masking to adjust volume automatically depending on the noise levels. This feature is only available in Sleep Mode.

SLEEP DETECTION

CONTROLS

You can customize more controls in the soundcore app. Phone call function is not supported on soundcore Sleep A10. Please use your mobile phone to answer a call.

	Switch listening modes (Music Mode / Sleep Mode)	Tap twice firmly (L)
	Play / Pause	Tap twice firmly (R)

POWERING OFF

To power off, place the earbuds in the charging case and close it.


The earbuds will automatically power off after 10 minutes if they are not connected. The duration can be set in the soundcore app.

RESET

Reset if the earbuds have issues pairing with each other or with other devices. Delete the pairing history from your Bluetooth device first. Place the earbuds in the charging case and leave the case open.

Press and hold the button on the charging case for 10 seconds until the LED indicators rapidly flash white 3 times.

LED LIGHT GUIDE

	Flashing white rapidly
	Flashing white slowly
	Steady white
	Light off

Videos

Soundcore SLEEP A10 Earbuds Review Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Soundcore Sleep A10 Manual