Soundcore P30i Quick Start Manual

Hide thumbs Also See for P30i:

Download this manual

APP

Download the soundcore app to experience Adaptive Noise Cancelling, Find Earbuds, dual connections, ﬁrmware updates, and more exciting features.

If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.

Click this link to download: http://dl-soundcore.soundcore.com/qcdl?ﬂow=soundcore

WEARING

Choose the ear tips that ﬁt your ears best and take a ﬁt test in the soundcore app to ensure you get the best ANC performance.

Note: Medium ear tips come attached to the earbuds.

* Dust, earwax, or other debris can accumulate in the earbuds. To maintain optimal sound quality, regularly clean

your earbuds by using a cotton swab slightly moistened with rubbing alcohol to gently wipe the metal mesh

ﬁlter under the rubber ear tips.

USING THE PHONE HOLDER

The charging case can also be used as a mobile phone holder.

Unfold the phone holder as shown. Then you can place your phone on the holder.

POWERING ON AND PAIRING

1. Peel off the protective ﬁlm on the earbuds.

2. Return the earbuds to the charging case and close the case. Then reopen the charging case.

3. Take out the earbuds. The earbuds will automatically power on and enter pairing mode. Select "soundcore P30i" from your device's Bluetooth list.

Need help?

Do you have a question about the P30i and is the answer not in the manual?

Page 1 Click this link to download: http://dl-soundcore.soundcore.com/qcdl?ﬂow=soundcore WEARING Choose the ear tips that ﬁt your ears best and take a ﬁt test in the soundcore app to ensure you get the best ANC performance. Note: Medium ear tips come attached to the earbuds.
Page 2 * A full battery recharge takes about 2.5 hours and 10 minutes of charging offers 2 hours of playtime. DUAL CONNECTIONS To connect the earbuds with two Bluetooth devices at the same time, ﬁrst open the soundcore app, go to settings, and select Dual Connections > Enable Dual Connections > Connect New Device.
Page 3 If the LED indicator stays on for 4 seconds and then goes off, it means the charging case has sufﬁcient power. If the LED indicator ﬂashes white for 4 seconds, it means the charging case is at low battery and needs to be charged. *You can check the battery level of earbuds in the soundcore app. POWERING OFF To power off, return the earbuds to the charging case.
Page 4 The last five 00001-99999 Denotes serial No. Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023.For the Statement of Compliance, visit the website: https://uk.soundcore.com/pages/psti- related.