Advertisement
LED indicators (Earbuds & Charging case)
![]() | Steady white | Being Charging |
![]() | Light off |
|
The earbuds will automatically power on when taken out of the charging case and power off when placed back into the charging case.
LED indicators (Earbuds)
ON | ![]() | Steady white for 1 second |
OFF | ![]() | Steady red for 1 second |
The right earbud will automatically connect with the left earbud when taken out of the charging case.
LED indicators (Earbuds)
![]() | Breathing white | TWS connecting |
![]() | Steady white for 1 second | TWS connected |
The earbuds will enter pairing mode when powered on. You are requested to confirm the connection when you see a pop-up.
LED indicators (Earbuds)
![]() | Flashing white | Bluetooth pairing |
![]() | Steady white for 1 second | Bluetooth connected |
In the pairing process, some devices are incompatible with Qualcomm True Wireless PrimarySecondary dual pairing names, it may notice "connection unsuccessful" when you tap "Pair" or even no screen pops up. Don't worry and it will not influence the using.
Once successfully paired, the primary earbud connects with your device and transfers signal to the secondary earbud, the latter one will not connect with your device. As a result, in the Bluetooth pairing list on your device, it may indicate that only one side is connected while the other side is not.
![]() | ||
Play / Pause | ![]() | Press (R/L) |
Next track | ![]() | Press twice (R) |
Previous track | ![]() | Press twice (L) |
Volume up / down | Control volume via the connected device | |
![]() | ||
Answer / End a call | ![]() | Press (R/L) |
Reject a call | ![]() | Press and hold for 1 second (R/L) |
Enable mono mode | Remove either one of the earbuds off your ear and press and hold the button on the other earbud for 1 second | |
![]() | ||
Activate Siri or other voice assistant software | ![]() | Press and hold for 1 second (R/L) |
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect with your device properly.
Specifications are subject to change without notice.
Input | 5 V ![]() |
Rated output power | 7 mW @ 1% THD |
Battery capacity | 55 mA x 2 (earbuds); 700 mA (charging case) |
Charging time | 2 hours |
Playtime (varies by volume level and content) | 7 hours (Totally 40 hours with the charging case) |
Driver size | 6 mm × 2 |
Frequency response | 20 Hz - 20 kHz |
Impedance | 16 Ω |
Bluetooth version | V 5.0 |
Bluetooth range | 10 m / 33 ft |
Qualcomm® aptXTM Technical specifications
Compression ratio: 4:1
Word depth: Support 16bit and 24bit
Decoding delay: Sample rate 48kHz<2ms
Dynamic range: 16bit>92dB, 24bit>120dB
Data rates: 352kbps
Decode mode: Stereo
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the Life P2 and is the answer not in the manual?
Questions and answers