Wildix W-AIR LIFESAVER-EX User Manual

W-AIR LIFESAVER-EX USER GUIDE - ENGLISH
PACKING LIST
• W-AIR LifeSaver-EX
1 x handset with Lithium-Ion battery with mounted belt
◦
clip
1 x screwdriver
◦
1 x belt clip cover
◦
1 x pull cord cover
◦
1 x swivel for belt clip
◦
• W-AIR LifeSaver-EX charger
1 x charger
◦
1 x cable
◦
• W-AIR LifeSaver-EX power supply
1 x A/C adapter
◦
1 x EU plug
◦
1 x UK plug
◦
SAFETY INFORMATION
https://www.wildix.com/safety-information/
PUT INTO THE OPERATION
1. Open the battery compartment by turning the lock
lever and slide down the battery cover
2. Place the battery correctly in its compartment
3. Secure the battery with the built-in screw using the
provided screwdriver
4. Make sure the battery is correctly screwed on and
close the battery compartment
5. Place the phone into the charger and fully charge the
battery (this may take up to 6 hours)
The blue LED of the charger is on when the phone is properly
placed into the charger and charging.
PHONE OVERVIEW
Version 09/2024
TURN ON/ TURN OFF
Press and hold the On-hook key for at least 2 seconds to
turn on.
Press and hold the On-hook key for at least 2 seconds to
turn off.
REGISTER TO THE BASE
1. Press the Menu key
2. Select Connectivity
3. Select Register
4. Select an empty slot and enter the PIN (by default, 0000)
5. Press Ok
LOGIN
1. Dial 99 and press the green Off-hook key
2. Enter your extension number
3. Enter the first five characters of your password
4. Press 1 when prompted
To enter your password from the phone's keypad: press once an
alphanumeric key corresponding to a letter which you need to enter;
press the star button (*) to enter any special character.
Example: Password: 4Ag7$Zl@
Enter: 4247*
Page 1 of 2