Modem/Isdn Connection - Medion PC TITANIUM MD 8000 Getting Started Manual

M /ISDN C
ODEM
D r a w i n g r e f e
D r a w i n g r e f e
If your computer is fitted with a modem or ISDN card, con-
nect the matching end of the communications cable with port
Q of your PC. The socket is identified as Line. Plug the other
end into of the communications cable to the telephone wall
socket or into the network port provided.
M
ODEM
The modem cable has an RJ11 plug, which is plugged into
the modem of your PC, and a TAE plug, which fits an N-
coded, analog telephone socket. For further information
please refer to the Modem section.
ATTENTION! Please observe that the modem
may only be connected to an analog telephone
line. The connection of a digital system (ISDN
etc.) to an analog telephone line can possibly
cause damages to the modem or the connected
devices and the telecommunication network.
ISDN
The ISDN cable has RJ45 plugs at either end. It makes no
difference which end is plugged into which socket.
1. Connect the matching plug of the enclosed com-
munication cable to jack Z of your computer. Usu-
ally the jack is marked with „Line".
2. Then connect the other plug to the telephone or
ISDN outlet.
ATTENTION! Operate the ISDN unit only
with digital telephone systems. This prevents
an inadmissible operation possibly causing
damages to the unit or the connected devices.
ONNECTION
r e n c e : Z
r e n c e : Z
C
C
A
A
B L I N G
B L I N G
19