Mi Temperature and Humidity Monitor 2 (LYWSD03MMC) Manual

Product Overview

Front

Rear

Installation

Installing the Battery
Remove the cover from the cover opening of the monitor, and place a CR2032 battery with the positive (+) side facing upwards, then reinstall the cover.
Note: Battery is not included and sold separately.

You can use and install your monitor in the following ways:

1. Placing: Directly place the monitor on the surface of the furniture such as table, bookshelf.
2. Using the adhesive sticker: Remove the release liner from one side of the adhesive sticker to stick it on the back of the monitor, then remove the release liner from the other side to stick it at the desired place on the wall
   
3. Hanging: Remove the back cover of the monitor, and lead the lanyard's loop through the hole and around the hook. Reinstall the back cover, then hang the monitor. Note: Lanyard is not included and sold separately.
   

Display Description

Symbol lnstructions

Low Battery Notification
When the battery is at a low level, this symbol appears on the display. Please replace the battery.

Smart Connection
Connect with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app *. Control your device, and interact it and other smart home devices with Mi Home/Xiaomi Home app.
Sean the QR cade to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app stare to download and install it.

Open Mi Home/Xiaomi Home app, tap "+" on the upper right and then follow prompts to add your device.
* The app is referred to as Xiaomi Home app în Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.

Connect with Other Devices
Make sure your temperature and humidity monitor îs connected with Mi Home/Xiaomi Home app. Tap on the upper right corner of the monitor's user interface, then follow the on-screen instructions to connect with other smart devices.

Note: The monitor can only connect with these devices supporting the function of Mi Bluetooth Gateway. Please contact the customer service for detailed information.

Restoring Factory Settings

Remove the back cover when the monitor is working normally, and use a conductive material to connect the two contact points above the battery for about 5-8 seconds. Once the monitor restarts, the factory settings have been restored and previously saved data has been cleared.

Daily Care & Maintenance

• Please prevent water from getting into the monitor when cleaning it.
• When the surf ace of the monitor is dirty, it can be wiped clean using a damp soft cloth with some neutral detergent.

Precautions

• Do not immerse the ventilation holes into any liquid.
• Do not remove the monitor from a wall with force if it is attached with the adhesive sticker, so as to avoid damage to the wall or the monitor.
• This monitor is not suitable for use in environments with temperatures below 0ºC. Please keep it away from harsh environments with high temperatures or high humidity.
• This monitor is design ed to facilitate a healthy lifestyle, but should not be used as a measuring tool.

Specifications

Name: Mi Temperature and Humidity Monitor 2
Model: LYWSD03MMC
Materials: ABS & PMMA
Dimensions: 43 "43 "12.5 mm
Net Weight: 18 g
Operating Voltage: DC 2.5--3 V
Battery type: CR2032 (Not included)
Wireless Connectivity: Bluetooth 4.2 Bluetooth Low Energy
Frequency Range: 2402MHz-2480MHz
Maximum Output Power: 4.16dBm
Temperature Measurement Range: 0ºC to 60ºC
Temperature Accuracy: ±0.1ºC
Humidity Measurement Range: 0-99% RH
Humidity Accuracy: ± 1% RH
Note: illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.