Initial Settings - Sealife DC1200 Instruction Manual

Initial Settings

Setting the Date and Time
The date/time needs to be set if and when:
The camera is turned on for the first time.

The camera is turned on after leaving the camera without the battery for

an extended period of time.
When the date and time information is not displayed on the LCD monitor, follow
these steps to set the correct date and time.
1. Press the MENU button.
2. Select [Setup] with the  button.
3. Select [Date/Time] with the  / 
buttons, and press the SET button.
Select the date format with the  / 

buttons, and press the SET button.
Select the item's field with the  /

 buttons and adjust the value for
the date and time with the  / 
buttons.
The time is displayed in 24-hour

format.
After confirming all settings are

correct, press the SET button.
4. To exit from the [Setup] menu, press the
MENU button.
When you are in the Date/Time menu, you can also use the zoom lever

to increase or decrease the time/date values and use the Shutter button
to set the value.
NOTE
19