Table of Contents
Advertisement
again.
2. Q: Why can't I use the utility?
A: Solution 1: Check out your Ethernet connection and power adapter.
Solution 2: Make sure that the IP address of your computer is located
between 192.168.1.2 and 192.168.1.254. The Subnet Mask should be
255.255.255.0. The default Gateway is 192.168.1.1. To confirm these
settings, please follow the instructions below.
Windows 95 or 98:
1. Click Start > Run > input winipcfg > click OK.
2. Check out the IP address, Subnet Mask, and Default Gateway. If the
data is incorrect, please input Release All, press enter, and then input
Renew All.
Windows NT, 2000, or XP:
1. Click Start > Run > input cmd > click OK.
2. Please input ipconfig /all on Command Prompt.
3. Check out the IP address, Subnet Mask, and Default Gateway. If the
data is incorrect, please input ipconfig /release, press Enter, and
then input ipconfig /renew.
Solution 3: Check the connection settings of your browser and make sure
the HTTP Proxy is disabled. Please open your browser.
Internet Explorer:
1. Select Tools > Internet Options > Connections.
2. Select Never dial a connection, and click on LAN settings.
3. Make sure no checkbox is selected. Press OK.
4. Press OK.
Netscape Navigator:
1. Select Edit > Preferences > select Advanced.
2. Select Proxies > Select Direct connection to the Internet > Click
on OK.
http://www.sapido.com.tw
261
User' s Manual V1.0
Advertisement
Table of Contents
