Sapido GR-1222 User Manual page 101

1. Enable Port Forwarding
Please select to enable Port Forwarding service or not.
2. IP Address
Please specify the IP address which receives the incoming packets.
3. Protocol
Please select the protocol type.
4. Port Range
Please enter the port number, for example 80-80 or 20-22。
5. Comment
You can add comments for this port forwarding rule.
6. Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on Reset to
clear all the input data.
7. Current Port Forwarding Table
It will display all port forwarding regulation you made.
8. Delete Selected & Delete All
Click Delete Selected will delete the selected item. Click Delete All will delete
all items in this table.
9. Reset
You can click Reset to cancel.
*The following figure shows the IP forwarding configuration of your web on a local
area network. The web server is located on 192.168.1.100, forwarding port is 80,
and type is TCP+UDP.
Configuration:
Private IP: 192.168.1.100
Port: 80 - 80
Type: TCP+UDP
http://www.sapido.com.tw
101
User' s Manual V1.0