Table of Contents
Advertisement
1. Enable IP Filtering
Please select Enable IP Filtering to filter IP addresses.
2. Local IP Address
Please enter the IP address that needs to be filtered.
3. Protocol
Please select the protocol type of the IP address.
4. Comment
You can add comments for this regulation.
5. Apply Changes & Reset
Click on Apply Changes to save the setting data. Or you may click on Reset to
clear all the input data.
6. Current Filter Table
It will display all IP addresses that are filtering now.
7. Delete Selected & Delete All
Click Delete Selected will delete the selected item. Click Delete All will delete
all items in this table.
8. Reset
You can click Reset to cancel.
5.4.4
This function can limit a specific MAC address to access the Internet. The network
card, whose MAC address is listed on filter table, will be denied the access request
by router.
http://www.sapido.com.tw
MAC Filtering
107
User' s Manual V1.0
Advertisement
Table of Contents
