HOMCOM 820-413V70 Operation Instructions page 3

shift or gear
Switch
Heater 1
Tip-over switch Temperature
Fuse
Heater 2
L
N
R
Lamp
Automatic temperature limiter
Cleaning
1.Disconnect the power supply before cleaning.
2.Wipe the outside surface of the product with a damp cloth, then dry it thoroughly with a
soft cloth.
Avoid using wax or brush polish, as they may react with the radiator and cause
discoloration.
Safety protection
1. Whilst in operation, do not cover the radiator – this could result in a fire hazard.
2. Keep the radiator at least 90cm away from furniture, curtains, bed sheets, clothes, walls
and any flammable objects.
3. Do not disassemble the radiator fins.
4. Take caution when children are near or using the radiator.
5. Do not allow the cord to touch damp or hot objects. Keep the cord out of reach of
children.
6.Do use this appliance outdoors.
7.Keep this product away from hot gasoline and electrical burners.
8.Do not use the radiator if the wire or plug is damaged. Seek professional repair if
necessary.
9.Do not remove any parts of the radiator, including buttons.
10.This appliance is only suitable for indoor rooms.
11.After removing dust, ensure any oil residue on the surface of the heater is wiped away.
IV. Warning
- Read all instructions carefully before operating this product.
- If not using the product for long periods, disconnect the power supply.
- Do not place clothes or other objects on the product for heating, as it may cause a fire
hazard.
- Avoid positioning the product directly below a socket outlet.
- Never use this product with high humidity, such as bathrooms, saunas or swimming pools.
- The oil used in this product is a specialized heat conduction oil. Opening the oil tank for
repair is only permitted by the manufacturer or authorised representatives. If there is an oil
leakage, contact us immediately. Wipe away any remaining oil on the surface.
- Only turn the timer dial clockwise as indicated by the arrow. Forcing it to turn
anticlockwise may damage the timer.
2