Auxiliary Input Socket - Sangean WFR-20 Operating Instruction

Auxiliary input socket

Your radio has a 3.5mm stereo jack socket for connection to external
audio sources. This can be configured to two sensitivity levels to suit
the output level of the connected device.
1. Connect an external audio source, such as an MP3 or CD player to
the Aux In socket on the back of the radio.
2. Use the Select control to switch on you radio and to access
the menus. If needed, use the Back option to access the main
Mode menu.
3. Rotate the Select control until Auxiliary Input is highlighted on
the display.
4. Press the Select control. The display will then show 'Aux In' and the
external source will be selected. Alternatively, simply press the Aux
button on the remote control.
5. If you are using a headphone output on the connected player,
adjust the volume control on the player to a mid-level and then
use the volume control on your Internet radio to set a comfortable
listening level.
Note:
In the event that the sound is either too quiet, or loud and distorted,
it may be that you need to adjust the Auxiliary Input level
setting - please see the following section.
39
42
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:13