Sangean WFR-20 Operating Instruction page 46

Setting the alarm cont.
6. Rotate the Select control to choose the hour for the alarm.
Press the Select control to store this setting and the minute digits
will be highlighted.
7. Rotate the Select control to choose the minute for the alarm.
Press and Select control to store this setting. The alarm day
option will be highlighted on the display:-
Once - will sound at one time only
Everyday - will sound everyday.
Weekly - will sound once every week.
Weekdays - will sound on weekdays only.
Weekends - will sound on weekends only.
8. Rotate the Select control to choose one of the above options for
the alarm. Press the Select control to store this setting. If setting the
alarm to everyday, weekdays or weekends please skip to point 10.
9. Rotate the Select control until the required day of the week for the
alarm is highlighted on the display. Press the Select control to store
this setting. The radio will enter the alarm mode option.
10. The alarm can be set to a radio station or a buzzer alarm. The radio
station alarm may be set to any of the stations which have been
stored as presets or to the station currently being listened to.
Rotate the Select control to select either Buzzer or the required
radio station.
11. Press the Select control to confirm the alarm settings. Your radio
will show 'Alarm Set' and will go back to the list of alarms with the
new alarm setting shown in the display.
45
48
20070929_WFR-20_381R101-A_GB.p65
2007/10/1, ¤U¤È 05:14