Using the reader with a key ................5 Using the reader with an access code ............5 Using the reader with a Key + PIN-code ............. 5 LED functions of the iLOQ NFC Reader .............. 6 Replacement and disposal ..................7 Disposal of decommissioned products ............7 Compliance ......................
Do not use excessive force when using the devices. 2. Overview iLOQ NFC Readers are used to read and write data to iLOQ Keys. A valid key will open the door, and each time the key is used, it will be updated with the latest data.
If using the iLOQ K55S.1 or K55S.2 Key Fob, charge the Key Fob before the first use. 5. iLOQ NFC Reader antenna location The iLOQ NFC Reader antenna location is marked with an antenna icon. The location is highlighted in the following picture.
If a valid key is used, the iLOQ NFC Reader communication LED shows a green light together with a sound to indicate that the door is unlocked. Non-valid key triggers a red LED and an error sound.
7. LED functions of the iLOQ NFC Reader Connection status Connection to the server is temporarily lost. • Amber light Reader and keys can be used normally, but the keys will not receive new updates from the server. • Red light Maintenance required.
Never discard an electrical appliance in household waste. Follow local laws and regulations for safe and environmentally friendly product disposal. Before discarding products, bear in mind that most iLOQ products are reusable. All programmable products can be reset to factory settings, after which they can be reused in another system.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications made to this equipment not expressly approved by iLOQ Oy may void the FCC authorization to operate this equipment. 9.1.3 ISED...
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications made to this equipment not expressly approved by iLOQ Oy may void the FCC authorization to operate this equipment. Document ID - 309672...
L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage. 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Document ID - 309672 iLOQ 5 Series (iLOQ N504i, N505i)
Page 11
5 Series iLOQ NFC Readers iLOQ N504i NFC/PIN Door Reader iLOQ N505i NFC/PIN Wall Reader User guide iLOQ support.iloq.com Elektroniikkatie 10 90590 Oulu Finland...
Need help?
Do you have a question about the 5 Series and is the answer not in the manual?
Questions and answers