iLoq 5 Series User Manual

iLoq 5 Series User Manual

Key fob
Hide thumbs Also See for 5 Series:

Advertisement

Quick Links

iLOQ 5 Series
K55S.2 Key Fob
User Guide
12/2023
Rev. 1.0
Document ID
306400
iLOQ Oy
support.iloq.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for iLoq 5 Series

  • Page 1 5 Series K55S.2 Key Fob User Guide 12/2023 Rev. 1.0 Document ID 306400 iLOQ Oy support.iloq.com...
  • Page 2: Table Of Contents

    Overview ......................... 4 Care and Maintenance ..................4 Before the first use ....................5 Operating instructions for the iLOQ K55S.2 Key Fob ......... 5 LED functions of the iLOQ K55S.2 Key Fob ..........6 Charging the iLOQ K55S.2 Key Fob ............7 Battery charging specifications ..............
  • Page 3: Safety Information

    Warning! A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Document ID - XXXXXX iLOQ S50 (K55S.2)
  • Page 4: Overview

    • Recharge the K55S.2 if operation is abnormal. During charging, the K55S.2 restarts itself. If abnormal operation continues, contact the locking system administrator. • The K55S.2 can be updated by the user via iLOQ Online connected NFC readers and the iLOQ S50 Phone Key Application.
  • Page 5: Before The First Use

    1. Press and release the button on the iLOQ K55S.2 Key Fob to activate it. The LED will blink amber. 2. Within 5 seconds of pressing the button, touch the iLOQ Reader Knob or iLOQ NFC Reader with the bottom of the K55S.2 to activate the lock.
  • Page 6: Led Functions Of The Iloq K55S.2 Key Fob

    4. Turn the iLOQ Reader Knob to operate the lock (open or close). NOTE! After 5 seconds (default), the cylinder will automatically be locked. When the cylinder is locked, the iLOQ Reader Knob cannot be rotated. NOTE! When locking a door, try to rotate the iLOQ...
  • Page 7: Charging The Iloq K55S.2 Key Fob

    The K55S.2 can be updated with the iLOQ S50 Phone key application by holding an activated K55S.2 to the phone’s NFC antenna while the iLOQ S50 Phone key application is active. The K55S.2 can also be updated by locking system administrators.
  • Page 8: Disposal Of Decommissioned Products

    Never discard an electrical appliance in household waste. Follow local laws and regulations for safe and environmentally friendly product disposal. Before discarding products, bear in mind that most iLOQ products are reusable. All programmable products can be reset to factory settings, after which they can be reused in another system.
  • Page 9: Compliance

    SIMPLIFIED EU DECLARATION OF CONFORMITY: Hereby, iLOQ Oy declares that the radio equipment type K55S.2 Key Fobs are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.iloq.com/en/declaration-of-compliance/...
  • Page 10 Changes or modifications made to this equipment not expressly approved by iLOQ Oy may void the FCC authorization to operate this equipment. EIRP output power System Frequency Maximum SAR ERP output Power [dBm] • 0.03 W/kg • • 13.56 MHz...
  • Page 11 5 Series K55S.2 Key Fob User Guide iLOQ support.iloq.com Elektroniikkatie 10 90590 Oulu Finland...

This manual is also suitable for:

K55s.2

Table of Contents