iLoq 5 Series Installation Instructions Manual
Nfc readers
Hide thumbs
Also See for 5 Series:
- Installation manual (23 pages) ,
- User manual (11 pages) ,
- Installation manual (23 pages)
Related Manuals for iLoq 5 Series
Summary of Contents for iLoq 5 Series
- Page 1 5 Series iLOQ NFC Readers iLOQ N504i NFC Reader iLOQ N505i NFC Reader Installation instructions 2/2024 Rev. Document ID XXXXXX iLOQ Oy support.iloq.com Internal...
-
Page 2: Table Of Contents
Installation ....................... 7 Device dimensions ..................7 Overview of the iLOQ NFC Readers ............9 Installing the iLOQ N504i NFC/PIN Door Reader ........9 Installing the iLOQ N505i NFC/PIN Wall Reader ........12 Mounting plates ..................... 13 LED functions of the iLOQ NFC Reader .............. 14 Replacement and disposal .................. -
Page 3: Safety Information
General notice sign. Indicates particularly important information about the installation and deployment. Read these instructions carefully before installation. This information is to ensure your safety and the long lifetime of the products installed. Use protective gloves. Document ID - XXXXXX iLOQ 5 Series (iLOQ N504i, N505i) Internal... -
Page 4: General Warnings
Make sure that the power supply to the installation site is disconnected during installation. Do not switch on the power supply until the installation is complete. iLOQ devices must be installed and used effortlessly without the use of excessive force. -
Page 5: Important
2.3 Licenses The iLOQ NFC Reader does not require a license, but the device it is connected to does. For more detailed information on licenses, see the iLOQ Partner Portal and the iLOQ 5 Series product price list. - Page 6 • The product was broken when subjected to vandalism or violence • The product has been installed incorrectly • The product has been exposed to strong chemical agents or exceptional corrosion or oxidation normal mechanical wear in the product Document ID - XXXXXX iLOQ 5 Series (iLOQ N504i, N505i) Internal...
-
Page 7: Installation
3. Installation 3.1 Device dimensions iLOQ N504i NFC/PIN Door Reader iLOQ N505i NFC/PIN Wall Reader Document ID - XXXXXX iLOQ 5 Series (iLOQ N504i, N505i) Internal... - Page 8 A5.016 Mounting Plate iLOQ A5.017 Mounting Plate Document ID - XXXXXX iLOQ 5 Series (iLOQ N504i, N505i) Internal...
-
Page 9: Overview Of The Iloq Nfc Readers
3.2 Overview of the iLOQ NFC Readers iLOQ NFC Readers can be installed directly to the door leaf or near the door, at a maximum distance of 10 m from a door module. iLOQ NFC Readers are connected to the reader bus of the iLOQ N502 Online Door Module or the iLOQ N503 Offline Door Module, or to the chain bus of the iLOQ N507 Online I/O Module to control electronic devices. - Page 10 4. Push the connector with a screwdriver to connect the cables to the quick connector. Use the guide to make the proper connections. 5. Slide the top of the iLOQ N504i into place on the mounting bracket. Document ID - XXXXXX...
- Page 11 6. Tighten the two Torx T5 screws on the bottom of the iLOQ N504i. Document ID - XXXXXX iLOQ 5 Series (iLOQ N504i, N505i) Internal...
-
Page 12: Installing The Iloq N505I Nfc/Pin Wall Reader
The iLOQ N505i NFC/PIN Wall Reader has a button keypad and an NFC reader. The installation and mounting of the iLOQ N505i is the same as the iLOQ N504i NFC/PIN Door Reader (the iLOQ N505i also has a quick connector for the cable) except for the dimensions. -
Page 13: Mounting Plates
The mounting plates are placed behind the mounting bracket. They have available slots so that the cable can be fed through from any side of the mounting plate. iLOQ A5.016 Mounting plate for the iLOQ N504i NFC/PIN Door Reader iLOQ A5.017 Mounting plate for the iLOQ N505i NFC/PIN Wall Reader... -
Page 14: Led Functions Of The Iloq Nfc Reader
4. LED functions of the iLOQ NFC Reader Connection status N503: Door module does not have the correct time (RTC). • Amber light N501, N502, N507: Indicates that the reader has connection to the door module (setup succesful). Indicates that the setup was not successful. -
Page 15: Replacement And Disposal
Never discard an electrical appliance in household waste. Follow local laws and regulations for safe and environmentally friendly product disposal. Before discarding products, bear in mind that most iLOQ products are reusable. All programmable products can be reset to factory settings, after which they can be reused in another system. -
Page 16: Compliance
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications made to this equipment not expressly approved by ILOQ Oy may void the FCC authorization to operate this equipment. ISED IC: 30160-N504I This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) and complies with part 15 of the FCC Rules. - Page 17 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications made to this equipment not expressly approved by ILOQ Oy may void the FCC authorization to operate this equipment. ISED IC:30160-N505I This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) and complies with part 15 of the FCC Rules.
- Page 18 L’exploitation est autorisée aux deux conditions suivantes: 3. L’appareil ne doit pas produire de brouillage. 4. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Document ID - XXXXXX iLOQ 5 Series (iLOQ N504i, N505i) Internal...
- Page 19 5 Series iLOQ NFC Readers iLOQ N504i NFC Reader iLOQ N505i NFC Reader Installation instructions iLOQ support.iloq.com Elektroniikkatie 10 90590 Oulu Finland Internal...
Need help?
Do you have a question about the 5 Series and is the answer not in the manual?
Questions and answers