Related Manuals for Kassel Sanitar ALCALA I KSL00406
Summary of Contents for Kassel Sanitar ALCALA I KSL00406
- Page 1 ALCALÁ I ALCALÁ II ALCALÁ I ALCALÁ II e l e c t R o n I c a l lY o P e R at e d F o ot Wa s H e R I n sta llat I on and m aIntenanc e guIde...
-
Page 2: Technical Data
INDEX TEChNICAL DATA tecHnIcal data PacK contents PRe-InstallatIon InFo InstallatIon FloW tIme adJustment ALCALÁ I Ksl00406 maIntenance Filters cleaning instructions ALCALÁ II Ksl00405 care and cleaning of chrome and special finishes 10-11 BatteRY RePlacement touch using Piezo technology Product Control: sPaRe PaRts lIst Minimum Operating Wa- 0.5 bar... -
Page 3: Pack Contents
PACk CONTENTS PACk CONTENTS alcalÁ I alcalÁ II Familiarize yourself with the part names and confirm that the parts are included. Familiarize yourself with the parts names and confirm that the parts are included. 1 x body with regulating valve 1 x body with regulating valve and shower head 1 x wall flange with rubber seal 1 x wall flange with rubber seal... -
Page 4: Pre-Installation Info
PRE-INSTALLATION INFO INSTALLATION alcalÁ I cHecK contents STEP 1- INSTALLING ThE FOOT WAShER separate all parts from the packaging and check each part with the “Pack contents” section. Pay attention to the different models variations. make sure all parts are accounted for before discarding any packaging material. shut off the water supply. - Page 5 INSTALLATION INSTALLATION alcalÁ I alcalÁ II STEP 1- INSTALLING ThE FOOT WAShER STEP 2 – CONNECTING ThE WATER SUPPLY turn on the central water sup- ply and the shut-off valves and check for leaks. shut off the water supply. Install the alcaláon the wall connected to the mains ensure that the regulating valve water supply.
-
Page 6: Maintenance
FLOW TIME ADJUSTMENT FLOW TIME ADJUSTMENT adJustment leVels 8) If you need to perform steps at adjusting level 2, wait until you see the led blink twice and then, perform the needed quantity of steps (with a maxi- the flow time is programmable on site. If necessary, the default flow time of 8 mum of 10 steps of 2 seconds). -
Page 7: Battery Replacement
SPARE PARTS LIST BATTERY REPLACEMENT loW BatteRY IndIcatoR alcala has an advanced battery level management system consisting of two steps. In the alcalÁ first step, the battery still has enough power to open and close the solenoid valve and allows the solenoid valve to open. seals and scReWs KIt 08530013 In the second step the battery might not have enough power to open and close the... -
Page 8: Limited Warranty
LIMITED WARRANTY SERVICE ChECk LIST Kassel sanItÄR s.l. warrants that its electronic products will be free of defects in check the battery. low or used up material and workmanship during normal use for two years from the date the product is battery. - Page 9 Ksl0000 04/2019 kassel Sanitär S.L. • avda. de castilla, 1 - Polígono Industrial, 28830 san Fernando de Henares, madrid, Spain • daimlerstraße 2, d-93133 Burglengenfeld, Germany tel. +34 916 778 993 | Fax. +34 916 777 774 | info@kassel.es | www.kassel.es...
Need help?
Do you have a question about the ALCALA I KSL00406 and is the answer not in the manual?
Questions and answers