Related Manuals for Kassel Sanitar RONDA N DP Series
Summary of Contents for Kassel Sanitar RONDA N DP Series
- Page 1 RONDA N DP / RONDA N DÚO DP SERIES WAll mOuNtED ElEctRONIc fAucEt OPERATION AND INSTALLATION guIDE...
-
Page 2: Technical Data
35mm / 1.38” The information in this document reflects products at the date of printing. Kassel Sanitar, S.L. reserves the right, subject to all applicable laws, at any time, at its 300mm / 11.81” maximum sensor range: sole discretion, and without notice, to discontinue or change the features, designs, materials and other specifications of its products, and to either permanently or temporarily withdraw any of the forgoing from the market. -
Page 3: Pack Contents
PAcK cONtENtS PAcK cONtENtS RONDA N DP RONDA N DÚO DP 1 x base 1 x base 1 x Wall rosette 1 x Corrugated Tube 1 x Wall rosette 1 x Spout and attachments (incl. electronic unit) 1 x Corrugated Tube M 4 x 4 set screw M 4 x 4 set screw O P E R At I O N... -
Page 4: Pre-Installation Info
PRE-INStAllAtION INfO INStAllAtION chEcK cONtENtS StEP 1 – INStAllING thE fAucEt Separate all parts from the packaging and check each part with the pack contents section. Pay attention to the variations of the different models. Make sure all parts are accounted for before discarding any packaging material. -
Page 5: Faucet Installation
fAucEt INStAllAtION fAucEt INStAllAtION Cut the temporary product base Mount the product base to cover. the opening cut in the wall, and secure the base support to the four small holes using Once the works on electricity, 4 screws. Make sure that the plumbing and tiles have been base is leveled to the center. -
Page 6: Settings Adjustment
fAucEt INStAllAtION SEttINGS ADjuStmENt If your model is RONDA N DP powered by battery a 9V battery is already installed in the dual power input box. DETECTION If your model is RONDA N DuO DP powered by battery: Connect the DELAY OuT TIME RANgE other cable coming from the electronic unit at the product base to the... - Page 7 SEttINGS ADjuStmENt SEttINGS ADjuStmENt DEtEctION RANGE: DELAY OuT TIME: This button allows modifying the water This faucet was supplied with a self flow time after the user removes his hands from the adjusting sensor. The ideal detection range for the specific faucet.
-
Page 8: Battery Replacement
BAttERY REPlAcEmENt BAttERY REPlAcEmENt BAttERY mODElS ONlY When the battery weakens, the LED indicator light will blink at a constant rate when the user’s hands are within the sensor range. The battery must be replaced within two ABOuT weeks. tO REPlAcE thE BAttERY: fOR RONDA N DP: Carefully open the dual power input box, using the Allen key provided. -
Page 9: Maintenance
lImItED WARRANtY mAINtENANcE fIltER clEANING INStRuctIONS KASSEL SANITÄR S.L. warrants that its electronic products will be free of defects in material and workmanship during normal use for two years from the date the product is These models are provided with a stainless steel filter preventing foreign particles purchased. -
Page 10: Troubleshooting
tROuBlEShOOtING PROBlEm INDIcAtOR cAuSE SOlutION No water 1.Sensor coming flashes con- out of the tinuously when Low battery. Replace battery faucet: user’s hands are within the sensor’s range. 2. LED in the 1. Range is too short. Increase the range sensor does not flash once 2. - Page 11 KSL01208 12/2019 Kassel Sanitär S.l. • Avda. de Castilla, 1 - Polígono Industrial, 28830 San Fernando de Henares, Madrid, Spain • Daimlerstraße 2, D-93133 Burglengenfeld, Germany Tel. +34 916 778 993 | Fax. +34 916 777 774 | info@kassel.es | www.kassel.es...