Samsung LN26A330 User Manual page 24

When Double (
➣
be set.
Temporary image retention may occur when viewing a static image on the set
➣
for more than two hours.
After selecting "Zoom" mode: Select
➣
Use the ▲ or ▼ button to move the picture up and down. After selecting
use the ▲ or ▼ button to magnify or reduce the picture size in the vertical
direction.
"Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting
➣
the by pressing the ► or ENtER
After selecting "Just Scan" in hDMI (00i) or Component (00i) mode:
➣
Select by pressing the ◄ or ►button. Press the ENtER
▲, ▼, ◄ or ► button to move the picture. Press the ENtER
Reset: Press the ◄ or ► button to select "Reset", then press the ENtER
button. You can initialize the setting.
HD (High Definition)
➣
16:9 - 1080i (1920x1080), 720p (1280x720)
Settings can be adjusted and stored for each external device you have connected to an input of the TV.
➣
Input Source
TV, AV, Component (480i, 480p)
Component(1080i), HDMI (1080i)
PC
Alternately, you can press the P.SIZE button on the remote control repeatedly to
O
change the picture size.
6:
Sets the picture to 16:9 wide mode.
4:
Sets the picture to 4:3 normal mode.
, ) mode has been set in PIP, the Picture Size cannot
by pressing the ◄ or ► button.
button.
Wide Zoom
Magnify the size of the picture more
than 4:3.
Just Scan
Use the function to see the full
image without any cutoff when HDMI
(720p/1080i), Component (1080i)
signals are input.
,
button. Use the
button.
Picture Size
16:9, Wide Zoom, Zoom, 4:3
16:9, Wide Zoom, Zoom, 4:3, Just Scan
16:9, 4:3
English - 
tV Size
6:
Wide Zoom
Zoom
4:
Just Scan
Move Enter
tV Size
6:
Wide Zoom
Zoom
4:
▲
Just Scan
▲
Move Enter
Zoom
The screen size when Wide screen is
vertically enlarged.
Return
Reset
Return