Table of Contents
Advertisement
OWNER'S
MANUAL.
600 PREMIUM
CHIMNEY HOOD
DCH284 IN STAINLESS STEEL
DCH285 IN BLACK
900 PREMIUM
CHIMNEY HOOD
DCH260 IN STAINLESS STEEL
DCH261 IN BLACK
The manufacturer strives for
continuous improvements.
For this reason, the text
and illustrations in this book
are subject to change
without notice.
Part Number 066044
You can rely on Defy
PREMIUM
CHIMNEY
HOOD
PLEASE READ THESE INSTRUCTIONS
BEFORE INSTALLING AND OPERATING.
INDEX
2 Description.
2 Before use.
2 Safety advice.
2 Electrical connection.
3 Preparing for installation.
3 Recirculating filtered air.
3 Venting air to the outside.
4 Installation.
6 Grease filters.
6 Optional carbon pad filters.
7 Operation.
7 Replacing the light bulbs.
8 Maintenance and cleaning.
9 Owner's responsibility.
9 Problem check.
9 Service Centres.
10 Warranty.
www.defy.co.za
Page 1
CAREFULLY
Advertisement
Table of Contents
Related Manuals for Defy DCH260
Summary of Contents for Defy DCH260
- Page 1 600 PREMIUM CHIMNEY HOOD DCH284 IN STAINLESS STEEL DCH285 IN BLACK 900 PREMIUM CHIMNEY HOOD DCH260 IN STAINLESS STEEL DCH261 IN BLACK The manufacturer strives for continuous improvements. For this reason, the text and illustrations in this book are subject to change without notice.
-
Page 2: Before Use
Description. • The extractor hood fan extracts the kitchen vapours and passes them through the grease filter. • The grease filter absorbs the solid parti- cles in the cooking vapours, keeping the kitchen almost free of grease. Before use. Before using your new extractor hood for the first time, please read this manual care- fully. -
Page 3: Preparing For Installation
Preparing for installation. The extractor hood has the ability to ei- ther recirculate the filtered air back into the kitchen, or to vent the filtered air through an outside wall. Decide on which option best suits you be- fore commencing with the installation. •... -
Page 4: Installation
Installation.. Installation sequence; Extractor unit / chimney brackets. Top chimney duct Bottom chimney duct • Carefully remove the extractor hood and the components from the packaging. • Remove the grease filters. CEILING MOUNTING TEMPLATE CUT TEMPLATE HOOD TEMPLATE LINE FROM CENTRE OF STOVE TO CEILING •... - Page 5 Before fitting the chimneys, connect up the outlet ducting (if required) and insert the fitted plug into the wall socket. • Remove the protective film from the chimney ducting taking care not to dam- age the polished stainless steel surface. •...
-
Page 6: Grease Filters
Grease filters. • Remove the plastic outer protective lin- ing on the grease filters before fitting them to the extractor hood. • To fit the filters, engage the two lugs at the rear of each filter into the rectangular slots of the extractor hood frame, lift the filter and press the handle catch inwards . -
Page 7: Operation
Operation. • Select the fan speed you require. • Push button ‘3’ for high extraction level. • Push button ‘2’ for medium. • Push button ‘1’ for low. • The fan indicator light will glow when the fan is operating. •... -
Page 8: Maintenance And Cleaning
Maintenance and cleaning. Important: Before cleaning any part of the hood, switch the power off at the mains. Cleaning the metal grease filters. • In normal operation (1 to 2 hours daily), the metal grease filters must be cleaned every 8 to 10 weeks. •... -
Page 9: Owner's Responsibility
Owner’s responsibility. NOTE: Since the following are not fac- tory faults, they are the owner’s respon- sibility. • Damage to exterior finish. • Breakage of glass and other compo- nents. • Replacement of the light bulbs. • Damage through improper use or instal- lation. -
Page 10: Warranty
Warranty. This certificate is issued by DEFY APPLIANCES LIMITED manufacturers of Defy and Ocean products, hereinafter the Company, to the original purchaser only, of the appliance described on the certificate and shall constitute the only warranty given in respect of this appliance.
Need help?
Do you have a question about the DCH260 and is the answer not in the manual?
Questions and answers