Memorizing Channels - Samsung HL-S5088W Owner's Instructions Manual

Memorizing Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable
channels. After the available channels are memorized, use the CH
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels
(automatic) and adding and deleting channels (channel manager).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels,
you must specify the type of signal source that is connected to the TV
(i.e., an air or cable system).
1
Press the MENU button.
Press the œ or √ button to select
"Channel", then press the ENTER
button.
2
Press the ... or † button to select
"Antenna", then press the ENTER
button.
Press the ... or † button to select
"Air" or "Cable", then press the
ENTER button.
3
Press the ... or † button to select
"Auto Program", then press the
ENTER button.
continued...
and CH buttons to scan
Channel
Return
Antenna Cable
Auto Program
Channel Manager
Fine Tune
Signal Strength
LNA Off
Channel
Channel
Return
Antenna
Air
Auto Program
Cable
Channel Manager
Fine Tune
Signal Strength
LNA On
Channel
Channel
Return
Antenna Air
Auto Program
Channel Manager
Fine Tune
Signal Strength
LNA On
Channel
English - 35
Enter
Enter
√
Enter