Picture Control - Samsung HL-S5088W Owner's Instructions Manual

Picture Control

Picture Control
You can select the type of picture which best corresponds to your viewing requirements.
English - 60
Changing the Picture Standard
1
Press the MENU button.
Press the œ or √ button to select
"Picture", then press the ENTER
button.
2
Press the ... or † button to select
"Mode", then press the ENTER
button.
Press the ... or † button again to
select "Mode", then press the
ENTER button.
3
Press the ... or † button to select the
desired picture mode (Dynamic,
Standard, Movie, or Custom), then
press the ENTER button.
Select "Return" by pressing the
... or † button, then press the ENTER
button to return to the previous menu.
Press the EXIT button to exit.
Alternate method
Press the P.MODE button on the
remote control repeatedly to select
the desired picture mode.
• Choose "Dynamic" for viewing the TV during the day or when
there is a bright light in the room.
• Choose "Standard" for general TV watching mode.
• Choose "Movie" when viewing the movie.
• Choose "Custom" if you want to adjust the settings according to
personal preference (see "Customizing the Picture Settings",
page 61).
Picture
Return
Mode
Size 16:9
Digital NR On
DNIe On
My Color Control
Film Mode Off
Picture
Enter
Mode
Return
Mode Dynamic
Contrast
100
Brightness
45
Sharpness
75
Color
55
Tint
G50 R50
Color Tone
Cool1
Reset
OK
Picture
Enter
Mode
Return
Standard
Mode
Dynamic
Contrast
80
Standard
Brightness
50
Movie
Sharpness
50
Custom
Color
50
Tint
G50 R50
Color Tone
Cool1
Reset
OK
Picture
Enter
Dynamic