USB Bluetooth adapter When paired to your Poly audio device and plugged into your computer, the Bluetooth adapter LEDs indicate your audio status. NOTE Adapter's USB connection and design may vary, but function is the same. Standard LEDs USB LEDs...
Pair your USB adapter To pair your Bluetooth USB adapter to your headset, do the following: Insert the USB adapter into your laptop or computer and wait for your computer to recognize it. Put your headset in pair mode (refer to your headset's user guide). Put your USB adapter into pair mode by pressing and holding the Pair button with a pen or paperclip until the USB adapter LED flashes red and blue.
To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound > Playback tab. Select Poly BT600, set it as the Default Device and click OK. To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >...
Load software Download Poly Lens App to get the most out of your device. Some softphones require the installation of Poly software to enable device call control (answer/end and mute) functionality. Download: poly.com/lens. • Enable features • Change settings • Configure call control for softphones •...
Need help?
Do you have a question about the BT600 and is the answer not in the manual?
Questions and answers