Related Manuals for Poly BT700
Summary of Contents for Poly BT700
- Page 1 PLANTRONICS + POLYCOM. NOW TOGETHER AS Poly BT700/BT700C Bluetooth USB adapter DRAFT User Guide...
-
Page 2: Table Of Contents
Contents USB Bluetooth adapter Connect to PC Pair USB adapter again Configure USB adapter Support... -
Page 3: Usb Bluetooth Adapter
USB Bluetooth adapter DRAFT NOTE Adapter design may vary Standard LEDs USB LEDs What they mean Flashing red and blue Pairing Solid blue Headset connected Flashing blue On a call Solid red Mute active Flashing purple Streaming media from computer LEDs when Microsoft Teams* is detected USB LEDs What they mean... -
Page 4: Connect To Pc
Connect to PC Your Bluetooth USB adapter comes pre-paired to your headset. Turn on your headset and insert the Bluetooth USB adapter into your laptop or PC. The USB adapter LED flashes and then turns solid to indicate the headset is connected to the USB adapter. -
Page 5: Configure Usb Adapter
To configure your Bluetooth USB adapter to play music, go to Start menu > Control Panel > Sound > Playback tab. Select Poly BT700, set it as the Default Device and click OK. To pause music when you place or receive calls, go to Start menu > Control Panel > Sound >... -
Page 6: Support
Netherlands © 2020 Plantronics, Inc. All rights reserved. Poly, the propeller design, and the Poly logo are trademarks of Plantronics, Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners.
Need help?
Do you have a question about the BT700 and is the answer not in the manual?
Questions and answers
why **** I getting 2 beeps in headphone
The Poly Voyager Focus 2 beeping twice every 10 seconds likely indicates a connection issue. This can happen if the headset is not properly paired or loses connection with the Bluetooth USB adapter (BT700) or the connected device. Ensuring the headset and adapter are correctly paired and the adapter is securely connected to the computer may resolve the issue.
This answer is automatically generated
THE BT700 receiver do not show any light
Based on the provided context, the Poly BT700 receiver may not be showing any light because it is not being recognized by the computer. Users have reported that the BT700 stops working and becomes invisible or inaccessible, requiring them to physically remove and reinsert it to get it working again. This suggests a connection or detection issue between the receiver and the computer.
This answer is automatically generated
What do the two tones mean, when headset is fully charged and you are utilizing for calls?