Disc Playback - Samsung HT-P10K Instruction Manual

Disc Playback

Press OPEN/
1
CLOSE button to
open the disc tray.
Note
•
Depending on the content of the disc, the initial screen may appear different.
To stop playback, press STOP during playback.
•
If pressed once, "PRESS PLAY" is displayed and the stop position will be stored in memory.
If PLAY/PAUSE (
(This function works only with DVDs.)
•
If pressed twice, "STOP" is displayed, and if PLAY/PAUSE (
beginning.
To temporarily pause playback, press PLAY/PAUSE during playback.
•
To resume playback, press PLAY/PAUSE (
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
•
By default, the video format is set to "PAL".
•
"NTSC" or "PAL" will appear in the display.
At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must be the same as the video format of your TV.
20
2
Load a disc.
•
Place a disc gently into the
tray with the disc's label
facing up.
) button or ENTER button is pressed, playback resumes from the stop position.
) button is pressed, playback starts from the
) button again.
Press OPEN/
3
CLOSE button to
close the disc tray.
DVD VCD
•
Playback starts automatically.
CD