Listening to Radio
You can listen to the chosen band (FM broadcast stations) by using either the automatic or manual
tuning operation.
Remote Control Unit
1
Press TUNER/
BAND button.
Main Unit
Press the Function
1
button to select the
desired band (FM).
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
•
56
2
Tune in to the
desired station.
Automatic Tuning 1
Automatic Tuning 2
Manual Tuning
2
Select a broadcast
station.
Automatic Tuning 1
PRESET and then press
button to select the preset station.
Automatic Tuning 2
then press and hold
automatically search the band.
Manual Tuning
press
higher frequency.
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
In a poor reception area, select MONO for a clear, interference-free broadcast.
When
is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH
to automatically search for
active broadcasting stations.
Briefly press TUNING/CH
to increase or decrease the
frequency incrementally.
Press the STOP ( )
button to select
Press the STOP ( ) button
to select "MANUAL" and
button to
Press STOP ( ) to select
MANUAL and then briefly
to tune in to a lower or