Page 1
Installation Instructions JK, JL, JT, 2007+ Atlas Front Bumper SB77892 For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022 S/B77892...
Page 2
Metric Socket and Wrench Set Drill Motor, 9/16” bit, Torque Wrench Blue Loctite* or Similar Thread-locker Compound Thank you for choosing Smittybilt accessories for your vehicle If you would like to view our full range of available accessories, please visit us at www.4wheelparts.com...
Page 3
Filler Plate for JL Skid plate Driver mounting bracket for JL Skid plate Passenger mounting bracket for JL For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022 S/B77892...
Page 4
M12 PREVAILING TORQUE TYPE HEXAGON NUTS 3002709 M10_30 HEX HEAD BOLTS(FULL THREAD) 3005435 M10_35 HEX HEAD BOLTS(FULL THREAD) For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022 S/B77892...
Page 5
Open the box containing your new Atlas Bumper, check all parts against the Bill of Materials outlined in the first pages of these instructions. If anything is missing, contact Smittybilt Technical Support immediately. Step 2: Apply the parking brake and chock all 4 tires.
Page 6
Step 7: On the Passenger side frame, behind the bumper, locate and disconnect the Bumper Harness Connector (Fig A.) For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022 S/B77892...
Page 7
Remove the bolts (Fig B.) securing it and set aside, it will not be re- used. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022...
Page 8
Step 11: Remove the OE plastic push rivets and any remaining screws. Remove the OE back panels from the OE front bumper For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022...
Page 9
For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022 S/B77892...
Page 10
OE bumper. Tighten and torque M4 hardware to 3ft-lbs For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022 S/B77892...
Page 11
Plate if necessary and secure with the M10 hardware. When satisfied with fitment, tighten & torque this hardware to 45ft-lbs. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022 S/B77892...
Page 12
M10x25x1.25 Bolts, Washers. Tighten just finger tight at this time to allow for adjust- ment later. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022 S/B77892...
Page 13
If not previously installed, the Bull Bar can be mounted to the bumper using provided (6 qty) M10x25x1.25 Button head bolts (Fig B.) Tighten and torque these to 30ft-lbs. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022...
Page 14
Re-connect the battery and check function. Double check all your hardware and connections, your install in complete. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022...
Use this only as a guide for hardware without a called out torque specification in the instruction manual. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Jeep JK, JL, JT REV 9-7-2022...
Page 16
Rollover and other types of vehicle accidents may result in serious injury or death to you, your passengers and others sharing the road. Smittybilt accessories are decorative and are not intended to reduce or avoid injury or damage in the event of an accident.
Need help?
Do you have a question about the Atlas SB77892 and is the answer not in the manual?
Questions and answers