Table of Contents
Advertisement
Once successfully paired to an external device,
appears within the Status area.
Note: Due to different specifications and features of other Bluetooth-
compatible devices, display and operations may be different, and
functions such as transfer or exchange may not be possible with all
Bluetooth compatible devices.
Note: Pairing between two Bluetooth devices is a one-time process. Once a
pairing has been created, the devices will continue to recognize their
partnership and exchange information without having to re-enter a
passcode again.
To disconnect a paired device:
Disconnecting a paired device breaks the connection between
the device and your phone, but retains the knowledge of the
pairing. At a later point when you wish to reconnect the device,
there is no need to setup the connection information again.
Verify your Bluetooth is active.
1.
From the Bluetooth settings page, touch the previously
2.
paired device (from the bottom of the page).
133
Tap OK to confirm disconnection.
3.
– or –
From the Bluetooth settings page, touch and hold the
name of the previously paired device, and select
Disconnect.
Note: Disconnections are manually done but often occur automatically if the
paired device goes out of range of your phone or it is powered off.
To delete a paired device (unpair):
Deleting a device from your list removes its "connection record"
and upon reconnection would require that you re-enter all the
previous pairing information.
Verify your Bluetooth is active.
1.
From the Bluetooth settings page, touch and hold the
2.
name of the previously paired device (from the bottom of
the page). This opens the connected device's menu
options.
3.
Tap Unpair to delete the paired device.
Advertisement
Table of Contents
