Samsung Galaxy S Captivate User Manual page 134

Connect to a Wi-Fi Network
Touch Settings
1.
settings.
The network names and security settings (Open network or
Secured with WEP) of detected Wi-Fi networks are
displayed in the Wi-Fi networks section.
Touch the network you want to connect to.
2.
Note: When you select an open network, you will be automatically connected
to the network.
Enter a wireless password if necessary.
3.
Manually add your new network connection
1. Touch Add Wi-Fi network.
Enter the Network SSID. This is the name of your Wireless
2.
Access Point.
Tap the Security field and select a security option. This
3.
must match the current security setting on your target
WAP.
If secured, you will also need to enter your WAP's
4.
password.
129
Wireless and network Wi-Fi
Tap Save to store the new information and connect to your
5.
target WAP.
Note: The next time your device connects to a previously accessed or
secured wireless network, you are not prompted to enter the WAP key
again, unless you reset your device back to its factory default settings.
Turning Wi-Fi Off
Touch Settings
1.
settings.
Tap the Wi-Fi field to deactivate the feature. The green
2.
checkmark will be removed.
Note: Use of wireless data connections such as Wi-Fi and Bluetooth can
cause an added drain to your battery and reduce your use times.
Manually Scan for a Wi-Fi Network
Touch Settings
1.
settings.
Tap Scan.
2.
Wireless and network Wi-Fi
Wireless and network Wi-Fi