Vitamix PROFESSIONAL Series 750 - Blender Manual

Before first use

1. Please read all the safety information, warnings and instructional material found in this booklet.
2. Set your Vitamix machine on a dry, level surface.
3. Make sure the power switch is set to Off. Plug the machine into an grounded electrical outlet.
4. Follow the cleaning instructions to prepare your machine for use.

SYMBOLS

Warning
Electrical shock hazard

High temperature when blending hot liquids.

Do not insert items into container while blender is in use

Never touch moving parts. Keep hands and utensils out of container.

Operate with lid and lid plug in place

Read and understand owner's manual

Do not immerse

Unplug while not in use, before cleaning, changing accessories or approaching parts that move in use

PARTS AND FEATURES

1. Control Panel: For more information, refer to Control Panel.
   
   Lids and tampers are not interchangeable between different container styles, types and sizes. For more information, refer to Tamper.
2. 64-oz. capacity container with 2-part lid:
   • Always use the lid and the lid plug when the machine is in operation
   • Never operate the blender without checking to make sure that the lid is securely locked in place.
   • Ounces, Milliliters and Cups are clearly marked.
   • Insert the lid plug through the lid and secure by turning clockwise.
   • Remove the lid plug to use the tamper or to add ingredients.
3. Tamper: Using the tamper maintains circulation by preventing air pockets from forming during blending.

Rotating Blades Can Cause Severe Injury.
DO NOT reach into the container while the machine is running.

To Lock the Lid in Place: Position the lid on the container with the lid flaps midway between the spout and the handle. Push the lid onto the container until it locks into place. The lid must always be secured when processing, especially when blending hot liquids that may scald. Never operate the blender without checking to make sure that the lid is securely locked in place.
To Remove the Lid: Lift up on one lid flap, while holding the container securely.
To Remove the Lid Plug: Rotate the lid plug anti-clockwise from the "locked" to the "unlocked" position and lift out.
Power Cord: Your machine is equipped with a long power cord. Store the unused portion neatly underneath. Plastic cable retainers hold the cord securely. They are flexible and return to position after the cord is lifted out.

CONTROLS

1. On/Off Switch:
   The On/Off (or Power) Switch is located on the lower right-hand side of the machine. The On/Off Switch controls the power to the machine.
   BEFORE moving the On/Off Switch to the On (I) position, make sure that the marker on the Variable Speed Dial is pointed at the Stop Symbol () at the top of the dial.
   After plugging in the unit, move the On/Off Switch to the On position to ready the machine for blending. Move the On/Off Switch to the Off position at night and whenever the machine is left unattended.
   If the On/Off switch is moved to the Off position to stop a programme midcycle, wait 30 seconds for power to recycle and the timer to reset before moving the On/Off switch back to the On position.
   When the Pulse, Start/Stop, and Programme Symbols brighten, the On/Off Switch is in the On position and power is flowing.
2. Start ()/Stop () Switch:
   After the marker on the Variable-Speed Dial is rotated from the Stop Symbol () either to Variable Speed 1 or a Programme setting, press the Start/Stop Switch to start the machine and initiate the blending process. Pressing the Start/Stop Switch again will stop the blending process.
   Programmes can be interrupted by pushing down the Start/Stop switch at any time. If reactivated by pushing down the Start/Stop switch, the programme will start at the beginning.
   
   
   
   To Avoid Possible Burns, Never Start on Speeds Above 1 when Processing Hot Liquids.
   Escaping steam, splashes or contents may scald.
   To secure the contents, lock the lid and lid cap securely in place prior to operating the machine.
   Always start on Variable 1, then slowly increase to 10.
3. Pulse Switch ():
   Variable Speed: Pressing down on the Pulse Switch will cause the machine to blend at the speed setting shown on the Variable-Speed Dial for as long as the Pulse Switch is held down.
   Programmes: The Pulse function can be used when a programme is selected. Pushing down the Pulse switch when a programme is selected will cause the machine to run at 50% of high power for as long as the Pulse switch is pushed down.
4. Variable-Speed Dial:
   The Variable-Speed Dial serves two functions: the use of fi ve programme settings or ten variable-speed settings.
   To use programmes: rotate the Variable-Speed Dial to the left to the desired programme.
   To use Variable Speed:
   1. Rotate the Variable-Speed dial to the right to 1.
   2. Press down on the Start / Stop switch.
   3. Rotate the Variable-Speed dial to the right or left during blending to increase or decrease the speed of the blades.
   4. At the end of the blending cycle, rotate the marker on the Variable-Speed dial back to the Stop Symbol () at the top of the dial.
5. Programmes:
   Your Professional Series 750 is equipped with fi ve programme settings for the most commonly used recipes. Rotating the Variable-Speed Dial left of centre allows you to select a programme for Smoothies, Frozen Desserts, Soups, Purées and a Cleaning cycle. These programmes are optimised for these recipe categories, but may also work well with other recipe choices.

ABOUT THE BLADES

The wet-blade container comes as standard with the Vitamix machine. The blade is identified by a "W" for wet. This blade is used for most of your recipes. Additional containers with wet or dry blades may be purchased separately.



Rotating Blades Can Cause Severe Injury.
DO NOT reach into the container while the machine is running.

Wet-Blade Container: Designed for processing liquids, including juice, frozen mixtures, sauces, soup, pureés, batter, and for wet chopping. The wet blades can also process grain and knead dough, but they are not quite as efficient as the dry blades in this application. See instructions for dry container use.

Dry-Blade Container: These blades are clearly marked "D" and are designed specifically for processing dry materials such as grain, cereal and coffee, and are also used for kneading bread dough. The dry blades CANNOT process liquids efficiently. If you prepare herbs on a regular basis, you may wish to purchase a separate dry-blade container.

Moving Parts May Become Hot with Extended Use.
DO NOT touch.

TAMPER

Rotating Blades Can Cause Damage.
Lids and tampers are not interchangeable between different container styles, types and sizes. Use the tamper that was supplied with your machine.

How to Determine the Tamper to be Used with Your Container
Each type of tamper is designed to be used safely and effectively with a particular container. If a tamper came with your container, it is the correct tamper for the container. If a tamper did not come with your container or you want to determine if a tamper that you already have can be used with your new container, please compare your container with the containers and matching tampers in the illustration below. Before using the tamper during the blending process, verify that it is the correct tamper.

• 64 oz./2 L Short Containers use Tamper P/N 016041, which is approximately 11 inches long.
• 64 oz./2 L Tall Containers use Tamper P/N 000760, which is approximately 12-½ inches long.
• 32 oz. and 48 oz./0.9 L and 1.4 L Containers use Tamper P/N 015033, which is approximately 9-¾ inches long.

To verify that you are using the correct tamper, place the lid on an empty container, remove the lid plug and insert the tamper. If it is the correct tamper, it should fit easily into the opening, but should not come into contact with the blades no matter where you move the tamper inside the container. IF THE TAMPER TOUCHES THE BLADES AT ANY ANGLE - DO NOT USE THE TAMPER WITH YOUR CONTAINER. If you do not have the correct tamper for your container, contact your local Vitamix Dealer.

HOW TO USE THE TAMPER

Rotating Blades Can Cause Severe Injury.

• DO NOT put hands, spatulas etc. into the container while the machine is running or while the container is still on the base.
• Lids and tampers are not interchangeable between different container styles, types and sizes. Use the tamper that was supplied with your machine.

• The splash disk (near the top of the tamper) and lid prevent the tamper from hitting the blades when the lid is secured properly in the locked position.
• The container should not be more than two-thirds full when the tamper is used during blending.
• To avoid overheating during blending, DO NOT use the tamper for more than 30 consecutive seconds.
• If the food does not circulate, the machine may have trapped an air bubble. Carefully remove the lid plug, while making sure the lid stays firmly in place. Release the air bubble by inserting the tamper through the lid plug opening.
• Holding the tamper straight down may not help the ingredients circulate. If necessary, point the tamper towards the sides or corners of the container. DO NOT try to force the tamper more deeply into the container.

HINTS FOR SETTING SPEEDS

To Avoid Possible Burns, Never Start on Speeds Above 1 when Processing Hot Liquids.
Escaping steam, splashes or contents may scald.
To secure the contents, lock the lid and lid cap securely in place prior to operating the machine.
Always start on Variable 1, then slowly increase to 10.

Variable Speed

Before using Variable-Speed, always begin with the Variable-Speed Dial marker pointing to the Stop Symbol () at the top of the dial.

1. Rotate the dial to the right to Variable Speed 1.
2. To activate the blending process, press down on the Start/Stop Switch.
3. Slowly turn the Variable-Speed Dial to the desired speed, depending on the recipe used.
4. At the end of the blending cycle, rotate the Variable-Speed dial back to the Stop Symbol () at the top of the dial.

When using variable speed, use the highest setting stated in the recipe for as much of the processing time as possible to make smoothies, soup, shakes, frozen mixtures, purées, nut butter, and for grinding grain. Processing times will generally be less than one minute (most take less than 30 seconds). The higher speed provides the best quality of refinement, breaking down ice, frozen fruit, whole fruit or vegetables, and grains to a smooth, lump-free consistency.

Blending for too long at too low a speed setting will overheat the machine and cause the Automatic Overload Protection to turn off the machine. Blending on a higher speed maximises the working of the motor's cooling fan to avoid overheating.
Programmes: Programme blending speeds and duration vary. The blender will stop automatically at the end of the programme.

OPERATING INSTRUCTIONS

During your first few uses, you may notice a slight burning odor as the motor is primed. This is completely normal and will dissipate quickly.

Wet-Blade Container

The Wet-Blade Container is designed for processing liquids, including juice, frozen mixtures, sauces, soup, purées and batter.
Before using this container with Programmes or the Variable-Speed option, always begin with the Variable-Speed Dial pointing to the Stop Symbol () at the top of the dial.

1. Move the On/Off switch to the On position.
2. Load the container before placing it on the motor base. Place liquids and soft foods in the container first, then solid items and, finally, ice.
   Although not necessary for blending, you may want to cut or break food into smaller pieces for more precise measurement of ingredients.
   
3. Fasten the 2-part lid securely. Always use the complete 2-part lid when blending (unless the tamper is inserted through the lid cap opening). Make sure that the lid is securely latched, especially when blending hot ingredients.
4. With the motor off, set the wet-blade container on the motor base by aligning it over the centring pad. Never attempt to put a container onto an operating motor base or to operate a motor base without a container properly in place.
5. Use the Variable-Speed dial to select a function.
   • Variable Speed – Rotate the dial to the right of centre to Variable Speed 1.
   • Programmes – Rotate the dial to the left of centre to the desired programme.
6. Activate the blades by pressing the Start/Stop Switch. Your container may shift as it is aligned.
   • Variable Speed - slowly rotate the Variable Speed dial to the right to the desired speed.
   • Programmes - The programme blending speeds and duration vary and will stop automatically at the end of the programme. Programmes can be interrupted by pushing down the Start/Stop switch at any time. If reactivated by pushing down the Start/Stop switch, the programme will start at the beginning.
7. If the mixture stops circulating, you may have trapped an air bubble. To resolve, insert the tamper through the lid cap and stir until it "burps". If this does not work, press the On/Off switch to stop the motor. Remove the container from the motor base and use a rubber spatula to press the air bubble away from the blades. Return the container to the motor base, replace the lid and continue blending.
8. Take proper care when handling and processing hot ingredients and when making hot soup and sauces.
   
   
   
   To Avoid Possible Burns, Never Start on Speeds Above 1 when Processing Hot Liquids.
   Escaping steam, splashes or contents may scald.
   To secure the contents, lock the lid and lid cap securely in place prior to operating the machine.
   Always start on Variable 1, then slowly increase to 10.
9. Due to the machine's speed, processing times are much quicker than with standard appliances. Until you are accustomed to the machine, time things carefully to avoid over-processing.
10. After pressing the Start/Stop switch to stop the cycle, wait until the blades stop completely before removing the lid or container from the motor base.

Dry-Blade Container

Before using this container with programmes or the Variable-Speed option, always begin with the Variable-Speed Dial pointing to the Stop Symbol () at the top of the dial.
If purchased, your dry-blade container should be used only for hard, dry materials, such as grain, and for kneading dough.

1. Load the container before placing it on the motor base.
2. Fasten the 2-part lid securely. Always use the complete 2-part lid when blending (unless the tamper is inserted through the lid cap opening).
3. With the motor off, set the dry-blade container on the motor base by aligning it over the centring pad. Never attempt to put a container onto an operating motor base or to operate a motor base without a container properly in place.
4. To begin, make sure that the On/Off switch is in the On position.
5. Use the Variable-Speed dial to select a function.
   • Variable Speed - Rotate the dial to the right of centre to Variable Speed 1.
   • Programmes - Rotate the dial to the left of centre to the desired programme.
6. Activate the machine by pressing the Start/Stop Switch. Your container will shift and align itself.
   • Variable Speed - slowly increase the Variable Speed to the desired speed.
   • Programmes - The programme blending speeds and duration vary and will stop automatically at the end of the programme. Programmes can be interrupted by pushing down the Start/Stop switch at any time. If reactivated by pushing down the Start/Stop switch, the programme will start at the beginning.

CARE AND CLEANING

To prepare your new machine for initial use, follow the steps under Normal Cleaning, below. This will clean the unit and break in the motor.
During your first few uses, you may notice a slight burning odor as the motor is primed.
This is completely normal and will dissipate quickly.

Container

To prepare your new machine for initial use, follow the steps under Normal Cleaning, below. This will clean the unit and break in the motor.

Normal Cleaning:
Before using the Variable-Speed option, always begin with the Variable-Speed Dial marker pointing to the Stop Symbol () at the top of the dial.

1. Fill the container half full of warm water and add a few drops of washing-up liquid to the container.
2. Snap or push the complete 2-part lid into the locked position.
3. Perform one of the following procedures:
   • Variable Speed:
     1. Rotate the Variable-Speed dial to 1.
     2. Press the Start / Stop switch.
     3. Slowly increase variable speed to 10.
     4. Run the machine for 30 to 60 seconds.
     5. Rotate the Variable-Speed dial to the Stop Symbol () at the top of the dial.
   • Programme:
     1. Rotate the Variable-Speed dial to the Cleaning () programme icon. The Cleaning () programme will run for approximately 1 minute.
     2. After the programme stops, rotate the Variable-Speed dial to the Stop Symbol () at the top of the dial.
4. Rinse and drain the container.

To Sanitise:
Before using the Variable-Speed option, always begin with the Variable-Speed Dial marker pointing to the Stop Symbol () at the top of the dial.

1. Follow the cleaning instructions above.
2. Fill the container half full of water and add 1½ teaspoons of liquid bleach.
3. Snap or push the complete 2-part lid into the locked position.
4. Perform one of the following procedures:
   • Variable Speed:
     1. Rotate the Variable-Speed dial to 1.
     2. Press the Start / Stop switch.
     3. Slowly increase variable speed to 10.
     4. Run the machine for 30 to 60 seconds.
     5. Rotate the Variable-Speed dial to the Stop Symbol () at the top of the dial.
   • Programme:
     1. Rotate the Variable-Speed dial to the Cleaning () programme icon. The Cleaning () programme will run for approximately 1 minute.
     2. After the programme stops, rotate the Variable-Speed dial to the Stop Symbol () at the top of the dial.
5. Allow the mixture to stand in the container for an additional 1 ½ minutes.
6. Pour out bleach mixture. Allow container to air dry.
7. Do not rinse after sanitising.

Lid, Lid Cap and Tamper

Separate the lid and lid cap. Wash parts in warm, soapy water. Rinse clean under running water and dry. Reassemble before use.

To ensure continued and effective performance, do not put the container, lid, lid cap or tamper in the dishwasher.

Motor Base

1. Unplug the power cable.
   
   
   Electrical Shock Hazard.
   Always unplug before cleaning the motor base or when not in use.
   Do not put the motor base in water or other liquid.
   Failure to follow instructions can cause death or electrical shock.
2. Wash the outside surface with a damp, soft cloth or sponge that has been rinsed in a mild solution of washing-up liquid and warm water. Do not place the motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the switches so that they work freely. They may become sticky from use. Moisten a cotton bud with a household degreaser or cleaner and clean the grooves around the switches. Immediately dry all surfaces.
5. Polish with a soft cloth.

Retainer Nut Loosening

In the event that the retainer nut at the bottom of your container loosens and no longer holds the blade assembly securely in place, DO NOT CONTINUE TO USE THE CONTAINER. Contact Vitamix customer service immediately for instructions.

TROUBLESHOOTING

Your Vitamix motor is designed to be protected from overheating during use. This feature will shut off the motor. The motor will possibly emit a slight odor. If the motor shuts off due to overheating while blending, allow the machine to cool for 20-45 minutes before beginning another blending cycle. If you continue to experience problems after following these instructions, contact our Customer Service Department at 1.800.848.2649 or 1.440.235.4840. for instructions.

Tips to prevent "overloading" your Vitamix machine:

• Only process Vitamix recipes when learning to use the machine
• Do not process recipes at lower speeds than those recommended
• Do not process recipes at higher speeds than those recommended
• Do not process recipes for longer than recommended
• Use your tamper to process thicker mixtures and keep ingredients moving around and through the blades

SPECIFICATIONS

Professional Series™ 750

Motor:
≈ 2.2 peak output horsepower motor

Electrical:
220-240 V, 50/60 Hz, 1200 - 1400 W

Dimensions:
Height: 44.2 cm/17.4 in.
Width: 19.6 cm/7.7 in.
Depth: 23.9 cm/9.4 in.

IMPORTANT INSTRUCTIONS FOR SAFE USE

To avoid the risk of serious injury when using your Vitamix^® blender, basic safety precautions should be followed, including the following.
READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS BEFORE OPERATING BLENDER.

1. Read all instructions.
2. Not intended for use by or near children or persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge. Close supervision is necessary when any appliance is used by or near children or incapacitated persons.
3. Children should be supervised to ensure that they do not play with the appliance.
4. To protect against the risk of electrical shock, do not put the blender base in water or other liquid.
5. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Call Vitamix Customer Service at 1.800.848.2649 or 1.440.235.4840 or email service@vitamix.com at once for examination, repair, replacement, or electrical or mechanical adjustment. If purchased outside the U.S.A. or Canada, contact your local Vitamix dealer.
8. Alteration or modification of any part of the blender base or container, including the use of any part or parts that are not genuine authorized Vitamix parts, may cause fire, electric shock, or injury.
9. The use of attachments not expressly authorized or sold by Vitamix for use with this blender, including canning jars, may cause fire, electric shock, or injury.
10. Do not use outdoors.
11. Do not let cord hang over edge of table or counter.
12. Do not let cord contact hot surface, including the stove.
13. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A rubber scraper or spatula may be used, but only when the Vitamix blender is not running.
14. The tamper provided must be used only when the main part of the lid is in place.
15. Blades are sharp. Handle or remove blade and blade assembly from the container with extreme care to avoid injury. To reduce the risk of injury, never place a blade assembly on the motor base unless assembled to the Vitamix container.
16. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the container as this will damage the blades and other components when starting the machine and may cause injury.
17. Never attempt to operate with damaged blades.
18. Care shall be taken when handling the sharp cutting blades when emptying the bowl and during cleaning.
19. Always operate blender with lid and lid plug firmly in place. The lid plug should be removed only when adding ingredients and when using the tamper.
20. When blending hot liquids or ingredients, use caution; spray or escaping steam may cause scalding and burns. Do not fill container to the maximum capacity. Always begin processing on the lowest speed setting, variable speed 1. Keep hands and other exposed skin away from the lid opening to prevent possible burns.
21. When making nut butters or oil-based foods, do not process for more than one minute after the mixture starts to circulate in the container. Processing for longer periods can cause dangerous overheating.

To Avoid Injury.
Read and understand instruction manual before using this machine.

This product is intended for HOUSEHOLD USE ONLY and is not intended to be used for commercial purposes.
Do not leave your Vitamix blender unattended when operating.
Any repair, servicing, or the replacement of parts must be performed by Vitamix or an authorized service representative.

Electrical Shock Hazard.
Use grounded outlet only.
DO NOT remove ground.
DO NOT use an adapter.
DO NOT use an extension cord.
Always unplug before cleaning the motor base or when not in use.
Do not put the motor base in water or other liquid.
Failure to follow instructions can cause death or electrical shock.

NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT SAFEGUARDS AND THE IMPORTANT INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR VITAMIX BLENDER THAT CAN VOID YOUR WARRANTY AND CREATE THE RISK OF SERIOUS INJURY.

SERVICE AND REGISTRATION

If you purchased your Vitamix® machine directly from the Vita-Mix^® Corporation via the company's website or call center by phone, your product was registered at the time of purchase and your Vitamix machine's warranty has been activated.

Your machine is not yet registered with Vitamix if you:

1. Purchased from a retail or wholesale store
2. Received your Vitamix machine as a gift
3. Are not the original owner of the machine

Enjoy faster and easier service in the future by taking a few minutes to register your Vitamix machine today.

Choose one of these easy ways to register your machine:

1. Online at vitamix.com.au
2. Email service@vitamix.com.au or service@vitamix.co.nz
3. Call 1-800-766437 (AUS) or 050-853-0697 (NZ)

Your warranty may be honored by Vita-Mix^® Manufacturing.
Failure to register your machine will not diminish your warranty rights.

For customer service in Australia and New Zealand, please contact:
Vitamix Australia
167 King Street
Newcastle
NSW2300 Australia
1-800-766437 (AUS)
050-853-0697 (NZ)
vitamix.com.au
Service@Vitamix.com.au or Service@Vitamix.co.nz

Vita-Mix Corporation^®
8615 Usher Road
Cleveland, OH 44138-2103 U.S.A.
1.800.848.2649/+1.440.235.4840
vitamix.com