TRIBIT FlyBuds 3 (BTH92) - Earbuds Manual

Package Contents

Product Parts

How to Replace the Ear Tips

How to Wear the Earbuds

On / Off

The first time you use the earbuds, please tear off the insulation sticker. Then place them in the charging case and close it.

To turn On: open the charging case.

Bluetooth Connection Guidelines

• Connect the earbuds with a Bluetooth device
  Open the top cover of the charging case, and the earbuds will automatically enter Bluetooth pairing mode. Open the Bluetooth function in the Bluetooth device, refresh the Bluetooth device search and click the audio device named "FlyBuds 3" to connect. After successfully connecting, the earbuds indicator will go off
  

• The two ways to connect with other devices are as follows:

1. Please disconnect the earbuds with the currently connected Bluetooth device, and the earbuds will automatically enter Bluetooth pairing mode.
2. Please refer to earbuds reset operation. After resetting successfully, they will enter Bluetooth pairing mode.

Button Functionality

	Play/ pausethe music: Double-tap
	Answer / End a call: Double-tap
	Next track: Triple-tap
	Reject the incoming call ( incoming call status ): Press and hold the touch button for 2s
	Activate voice assistant: Press and hold the touch button for 2s and you hear the prompt tone, and then release it

Earbuds Indicator Light Display

Touch Button: white light ison when touched.
Bluetooth Pairing: red light flashes slowly.
Successful Connection: indicator light is off.
LOW Battery: red light quickly flashes twice every 20s.

Charging Case Indicator Display

• Open the upper cover of the charging case or short press the charging case button to display the battery power for 10 seconds.
  

Charging Guidelines

• Charging of the earbuds: Put earbuds into the charging case. Then close the cover and charging will begin.
  Charging time of earbuds: about 90 minutes
• Charging of the charging case: Insert one end of the USBcable into a power supply that supports 5V output, and the other end into the charging port of the charging case. The indicator lights will flash while it is charging, and the 4 indicator lights will always be on when it is fully charged.
  Charging time of the charging case: about 210 minutes

How to Reset the Earbuds

Place the left and right earbuds back into the charging case. With the cover open, press and hold the charging case button until the 4 indicator lights of the charging case flash four times at the same time, indicating that the earbuds are successfully reset.
Note: If there is a Bluetooth device connected to the earbuds after resetting, the pairing will need to be deleted for successful re-pairing.

The Left & Right Earbuds Pairing Guidelines

First disconnect the earbuds from the Bluetooth device. Put the left and right earbuds into the charging case, then take them out. Double-tap the touch button and the red light will flash slowly. Then long press the touch button until the red light flashes quickly After a few seconds, the red light on the left earbud will flash slowly, and the red light on the right earbud will be off, indicating that the left and right earbuds are successfully paired and connected.
Note: When the left and right earbuds lose connection.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download TRIBIT FlyBuds 3 (BTH92) - Earbuds Manual