TRIBIT FlyBuds C1 Pro (BTHA2) - Earbuds Manual

Package Contents

Power ON / Power OFF

Bluetooth Connection Instructions

For the First Use
Turn on the earbuds, activate the Bluetooth function on your device, and search for other Bluetooth-enabled devices. Find the device name "Tribit FlyBuds C1 Pro" to initiate the connection.

For the Non-First Use
Turn on the earbuds, and they will automatically connect to the last connected device.

Connect the earbuds with other devices
Method 1: Disconnect the currently connected Bluetooth device, and the earbuds will automatically return to Bluetooth pairing mode.
Method 2: Put the earbuds back in the charging case. Hold down the button on the charging case for 5 seconds until its indicators flash for 3 times, which indicates the earbuds are back to Bluetooth pairing mode.

Earbud Indicator Light Instruction

Power ON/OFF: The white/red indicator flashes for 1 second and then turns on/off.
Bluetooth Pairing: The red and white indicators flash alternately.
Connection Successful: The indicator turns off.
Re-connecting: The white indicator breathes.
Low Battery: The red indicator flashes slowly.

Earbuds Wearing

5 pairs of different-sized ear tips are provided to ensure you have the best choice for your ears.

Button Functionality

Left Earbud
Single-click: play/pause the music; answer/end a call
Double-click: previous track / reject an incoming call
Hold down for seconds: decrease the volume (in working state)
Click 3 times: activate the voice assistant (in nonconversation state)
Hold down for 2s: turn on the left earbud (in off state)
Hold down for 10s: turn off both earbuds (in standby state)

Right Earbud
Single-click: play/pause the music; answer/end a call
Double-click: next track / reject an incoming call
Hold down for seconds: increase the volume (in working state)
Click 3 times: switch modes
Hold down for 2s: turn on the right earbud (in off state)
Hold down for 10s: turn off both earbuds (in standby state)

Mode Conversion

The FlyBuds C1 Pro earbuds feature 3 working modes: Normal mode, Ambient mode, and Noise-Canceling mode. You can easily switch between them by clicking the right earbud 3 times.
When turned on, the earbuds will automatically enter Normal mode.

Charging Instruction

Charging the Earbuds
Put the earbuds back into the charging case, and close its cover to start charging. If the 2 indicators on the leftmost and rightmost of the charging case turn on, the earbuds are successfully being charged.
It takes about 90 minutes for earbuds to get fully charged.

Charging the Charging Case
The charging case indicator(s) will breathe during charging, and all 4 indicators will glow sturdily after it is fully charged (in about 120 minutes).

Reset

Put the earbuds back into the charging case and hold down its button for 10 seconds until the charging case indicators flash twice in a turn, which indicates the earbuds have been reset successfully.
Note: After resetting the earbuds, you need to delete the pairing record on your device and search for earbuds again for re-connection.

Safety Tips

1. Do not dismantle or modify the earbuds for any reason. Any resulting malfunction won't be covered by warranty.
2. Do not deliberately expose the earbuds to liquid because this may cause damages to the earbuds, invalidating the warranty.
3. Do not expose the earbuds to temperatures above 45°C or below -20°C.
4. This product has a built-in lithium battery. Do not disassemble, hit, squeeze or throw earbuds into the fire.
5. The FlyBuds C1 Pro earbuds contain small components. Please keep them away from children to avoid accidental swallowing or other injuries.
6. It is recommended to not use the FlyBuds C1 Pro earbuds when driving. Although it has an environmental monitoring mode, it is still illegal to do so in some regions. Please check and abide by the local laws and regulations on the use of headphones. Please stop listening immediately if you are distracted by the listening audio when driving or engaging in any activity that requires full concentration.
7. The FlyBuds C1 Pro earbuds and the charging case contain magnets. The magnetic fields generated by these magnets may interfere with pacemakers, defibrillators, or other medical equipment, thus please keep a safe distance between your medical equipment and the product.
8. These ear tips are added with antibacterial agents that have a certain inhibitory effect on bacteria, but if they are not properly cleaned, the earbuds may still cause ear infections. Please use a lint-free soft cloth to clean the FlyBuds C1 Pro earbuds regularly.

1. The earbuds will sound lower than the actual volume in a noisy environment.
2. Long-term high-volume listening may cause permanent damages to your hearing.
3. Please charge the earbuds with the provided charging cable and power adapter/computer. Only use an adapter that complies with the laws of your country/region, and international and regional safety standards.
4. Using the FlyBuds C1 Pro earbuds in very dry seasons or regions may easily cause static electricity accumulation, and you may feel a small amount of static electricity discharge from the earbuds. To reduce the risk of electrostatic discharge, please avoid using it in an extremely dry environment, or you can touch grounded, unpainted metal objects to discharge static electricity before using the FlyBuds C1 Pro earbuds.

Working Frequency & Transmitting Power

Working Frequency: 2402MHz ~ 2480MHz
Transmitting Power: -6 ~ 4dBm

Download and install the Tribit App from Google Play or App Store on your device, and then you can use it to customize the EQ, upgrade the firmware, restore the factory setting of the earbuds, and so on.