TRIBIT FlyBuds C2 (BTH96) - Earbuds Manual

Table of Contents

Contents

1 Package Contents
2 Product Parts
3 How to Wear the Earbuds
4 Power ON / Power OFF
5 Bluetooth Connection Instructions
6 Touch Control Instructions
7 Charging Instructions
8 How to Reset the Earbuds
9 Frequency band & Maximum transmission power
10 Important Notes
11 Documents / Resources
- 11.1 Download manual

Package Contents

Earbuds(UR)
Charging Case
USB-C Charging cable
User Manual

Product Parts

Product Parts - Part 1
Product Parts - Part 2

How to Wear the Earbuds

To Wear
Place the earbud in your ear canal and rotate it until comfortable.

To call
Aim the microphone at the mouth for a better call effect.

To Pick & Place

Power ON / Power OFF

For the first time use, please tear off the insulation sticker

To power On:
Open the charging case

To power Off:
Close the charging case

Bluetooth Connection Instructions

Connect the earbuds to a Bluetooth device
Open the charging case and the earbuds will automatically enter the Bluetooth pairing mode, then the earbuds' indicator lights will flash alternately red and white Turn on the Bluetooth function in the Bluetooth device, refresh the Bluetooth device listing, then select the paired audio device named "Tribit FlyBuds C?' to connect The indicator lights Of the earbuds will go Off after it connects successfully

Connect the earbuds with other devices:
Method 1: Please disconnect the earbuds with the currently connect- ed Bluetooth device, and the earbuds will automatically enter Bluetooth pairing mode
Method 2 : Tap either earbud for 4 times When the white indicator light goes on, touch and hold the earbud for 3 seconds. When the indicator lights Of both earbuds flash in red at the same time, the earbuds will automatically enter Bluetooth pairing mode

Touch Control Instructions

Play / Pause	Tap either earbud twice
Next Track	Triple tap the right earbud
Volume +	Touch and hold the right earbud (during a call or music playing)
Volume	Touch and hold the left earbud (during a call or music playing)
Voice Assistant	Triple tap the left earbud
Answer a Call	Tap either earbud once
End a Call	Tap either earbud twice
Rejecting an Incoming Call	Touch and hold either earbud
Power Off	Touch and hold either earbud for IOS (without a call Or music playing) and the red light will flash for Is with the power-off prompt tone: Power OFF
Power On	Touch and hold the left and right earphones for 6s and the white light will flash for 6s with the power-on prompt tone: Power ON

Charging Instructions

Charging Instructions
When the earbuds' indicator lights flashes in red slowly, please charge the earbuds in time.

To charge the earbuds: Put the earbudsinto the chargingcase and close the case to start charging. The indicator lights on the far left and right of the charging box show the charging status of the each earbud During charging, the indicator lights will be always on and will go off after the earbuds are fully charged.
Charging time of the earbuds: about 90 minutes
Open the top cover of the charging case and it'll display its battery level. When the battery runs out, the indicator light of the charging case will be off. Please charge the case in time.
To charge the charging case: Plug one end of the USBcable into a 5V power supply, and the other end into the charging port of the charging case for charging. The indicator lights will flash during the charging process, and the 4 indicator lights will stay on when the earbuds are fully charged.
Charging time of the charging case: about 90 minutes

*The above data comes from Thousandshores Laboratory.
Thousandshores reserves all rights for final explanation

How to Reset the Earbuds

Turn off the left and right earbuds. Touch and hold the touch area for 10 seconds (at the 6th second, the earbuds will turn on with the white indicator light flashing, keep touching the earbuds at this moment until the white indicator light is always on )
When the white indicator light is always on, double touch the left and right earbuds within 5seconds to enter the reset state
When you have done the above 2 steps, if the earbuds are reset successfully, the white lights of the left and right earbuds will flash quickly

Note: After resetting, if there is a Bluetooth device that has been connected to the earbuds, you need to delete the pairing record to allow the earbuds to be paired again

Frequency band & Maximum transmission power

Frequency band: 2402-2480MHz
Maximum transmission power: -6 - +4dBm

Do not dismantle or modify the earbuds for any reason, otherwise any malfunction of the earbuds is not covered by the warranty.
Do not deliberately contact the earbuds to liquids, which may damage the earbuds may be damaged and the warranty turns invalid
Do not place the earbuds in the environment where the temperature is too high or too low (above 45ºC or below -20ºC)
This product includes a built-in lithium battery. It is forbidden to disassemble, bump, squeeze or throw the product into fire.
Please keep the earbuds away from children to avoid accidental swallowing and other injuries

Important Notes

Under noisy environment, the voice from the earbuds will sound lower than the actual volume

Listening to music with high volume for a long time may cause permanent damage to your hearing.
Please use the charging cable and power adapter or computer to charge the earbuds. When charging, only use the adapter that comply with the national/regional regulations and international and regional safety standards.