TRIBIT MoveBuds H1 (BTH95) - Earbuds Manual

Package Contents

Power ON / Power OFF

Bluetooth Connection Instructions

Setting up your MoveBuds H1 the first time

Turn on the MoveBuds H1, activate the Bluetooth function on your desired device, and search for other Bluetooth enabled devices. Find the device name "Tribit MoveBuds H1" to initiate the connection.

Future usage with the MoveBuds H1

Once paired, the MoveBuds H1 will automatically connect to the last connected device when turned on.

Connecting the MoveBuds H1 with other devices

Method 1:
Disconnect the currently connected Bluetooth device, and the MoveBuds H1 will automatically return to Bluetooth pairing mode.

Method 2:
Place the MoveBuds H1 back into the charging case. Hold down the button on the charging case for five seconds until its indicators flash three times. The MoveBuds H1 will be ready to pair with a new device when removed from the case.

Wearing Your MoveBuds H1

The left earbud is placed on the right side of the charging case, while the right earbud is placed on its left side. Ensure you are putting the correct earbud into your ear before attempting to wear it.

Replace the Ear Tips

Five pairs of different-sized ear tips are provided to ensure you have the best choice for your ears.

Button Functionality

Left Earbud

Single-click: Play/pause the music / Answer a call.
Double-click: Previous track / End a call.
Click three times: Activate the voice assistant in a non-conversation state.
Hold down: Decrease the volume / Reject an incoming call.
Hold down (six seconds): While off, this will turn on the left earbud.
Hold down (ten seconds): Turn off both earbuds.

Right Earbud

Single-click: Play/pause the music / Answer a call.
Double-click: Next track / End a call.
Click 3 times: Ambient mode.
Hold down: Increase the volume / Reject an incoming call.
Hold down (six seconds): While off, this will turn on the right earbud.
Hold down (ten seconds): Turn off both earbuds.

MoveBuds H1 Indicator Light Instruction

Power ON/OFF: The white indicator will flash for one second before turning on/off.
Bluetooth Pairing: The white indicator will flash slowly while in pairing mode.
Connection Successful: The white indicator will turn off.
Re-connecting: The white indicator breathes slowly.
Low Battery: The white indicator flashes rapidly.

Charging Instruction

Charging the MoveBuds H1
Place the MoveBuds H1 back into the charging case and close the cover to start charging. If both the case's left and right light indicators are on, your MoveBuds H1 are successfully charging.
It takes about 90 minutes for the MoveBuds H1 to fully charge.

Charging the Charging Case
The charging cases indicators will breathe during charging, producing a solid glow. The MoveBuds H1 charging case takes 120 minutes to charge fully.

Reset

To reset the MoveBuds H1, place the MoveBuds H1 back into the charging case and hold down the button on the case for ten seconds. The charging case's lights will flash twice to indicate a successful reset.
Note: After resetting your MoveBuds H1, you must delete the pairing record on your previously connected device and search for earbuds again to reestablish a connection.

Safety Tips

1. Do not dismantle or modify the MoveBuds H1 for any reason. The warranty will not cover any resulting malfunction due to modifications.
2. The opening and closing edge of the charging case is much sharper than other positions. Please be careful when you open / close its cover to avoid scratches.
3. Do not expose the MoveBuds H1 to temperatures above 45°C or below -20°C as this may cause damage to your device.
4. The MoveBuds H1 contains a built-in lithium battery. Do not disassemble, hit, squeeze or throw MoveBuds H1 into a fire as this may cause an explosion.
5. The MoveBuds H1 contains small components. Please keep them away from children to avoid accidental swallowing or other injuries.
6. It is recommended not to use the MoveBuds H1 when driving as it is illegal in some regions. Please check and abide by the local laws and regulations on the use of headphones. Please stop listening using the MoveBuds H1 if you are distracted by audio devices when driving or engaging in activities that require complete concentration.
7. The MoveBuds H1 and the charging case contain magnets. The magnetic fields generated by these magnets may interfere with pacemakers, defibrillators, or other medical equipment. Please keep a safe distance between your medical equipment and the product.
8. The antibacterial agents coating the earbuds have an inhibitory effect on bacteria. However, the earbuds may still cause ear infections if not properly cleaned. Please use a lint-free soft cloth to regularly clean the MoveBuds H1.

1. The MoveBuds H1 may sound lower than the actual volume in a noisy environment.
2. Long-term high-volume listening may cause permanent damages to your hearing.
3. Please charge the MoveBuds H1 with the provided charging cable and power adapter/computer. Only use an adapter that complies with your country/region's laws and international and regional safety standards.
4. Using the MoveBuds H1 in dry seasons or regions may easily cause static electricity accumulation. You may feel a small amount of static electricity discharge from the earbuds. Please avoid using it in dry environments to reduce the risk of electrostatic discharge. As an extra safety measure, before using the MoveBuds H1, users may touch a grounded item or unpainted metal object to discharge any stored up static electricity.
5. The waterproofness of the earbuds is tested in the laboratory, which is different from the actual usage conditions. It's not recommended to immerse the earbuds in water for a long time or wear them for swimming, bathing, or other water sports that may lead to damages to the earbuds, or the warranty will be invalid.

Working Frequency & Transmitting Power

Working Frequency: 2402MHz ~ 2480MHz
Transmitting Power: -6 ~ 4dBm

Download and install the Tribit App from Google Play or Apple Store on your device. Use the app to customize the EQ, upgrade the firmware, or restore the factory setting of your Tribit products, including the MoveBuds H1.