Saving Channel Presets - Pioneer VSX-1019AH Operating Instructions Manual

05 Basic playback
Selecting channels and browsing by genre
From the SIRIUS Channel Guide, you can
browse SIRIUS Radio channels in the order
that they appear, or you can narrow your
channel search by genre.
• Main Zone:
184 Weather
185 TWN
186 Hardcore Sports
187 InfoPlus
188 RCI Plus
192 Rock Velours
193 energie2
198 Playboy
• Sub Zone (VSX-1019AH model only):
[ 184
[ 185
[ 186
[ 187
[ 188
[ 192
[ 193
[ 198
1/xxx
Press / to enter the SIRIUS Channel
1
Guide, then navigate through the channels
one at time with /, then press ENTER to
listen to the SIRIUS radio broadcast.
• To browse by genre, first press
CATEGORY, use / to select a genre,
then press ENTER.
• To cancel and exit any time, press RETURN.
Tip
• You can select channels directly by
pressing D.ACCESS, then the three-digit
channel number.
• You can press DISP to change SIRIUS Radio
information in the front panel display.
• The currently selected channel is
automatically chosen (without pressing
ENTER) after 10 seconds.
Note
1 You can reset the Channel presets, Memory, Channel Skip/Add, Parental Lock and Password settings in Resetting the
system on page 72.
50
En
Channel Guide
A/V RECEIVER
Exit
Channel Guide
Weather ]
TWN ]
Hardcore Sports ]
InfoPlus ]
RCI Plus ]
]
Rock Velours
energie2 ]
Playboy ]

Saving channel presets

This receiver can memorize up to 63 channels,
stored in seven banks, or classes (A to G) of 9
channels each.
1 Select the channel you want to memorize.
See Selecting channels and browsing by genre
above.
2 Press T.EDIT.
The display shows a blinking memory class.
3 Press CLASS to select one of the seven
classes, then press / to select the channel
preset you want.
You can also use the number buttons to select
a preset.
4 Press ENTER.
After pressing ENTER, the preset class and
number stop blinking and the receiver stores
the SIRIUS channel.
Tip
• You can also press MEMORY during
reception display to save the information of
up to five songs. See Using the SIRIUS
Menu below to recall this information.
Listening to channel presets
1 Press CLASS to select the class in which
the channel is stored.
Press repeatedly to cycle through classes A to G.
Press / to select the channel preset
2
you want.
• You can also use the number buttons on
the remote control to recall the channel
preset.
1