Connecting Other Audio Components; About The Wma9 Pro Decoder - Pioneer VSX-1019AH Operating Instructions Manual

Connecting your equipment
Connecting other audio
components
This receiver has both digital and analog
inputs, allowing you to connect audio
components for playback.
This receiver features five stereo audio-only
inputs. One of these inputs have corresponding
outputs for use with audio recorders.
Most digital components also have analog
connections.
When you set up the receiver you'll need to tell
the receiver which input you connected the
component to (see also The Input Setup menu
on page 39).
VSX-1019AH
DIGITAL
HDMI
AUDIO
ASSIGNABLE
1 3
COAXIAL
ASSIGNABLE
IN ( DVD ) 1 IN ( CD )
IN 3 OUT
CD-R
AUX CD
SAT DVR
OUT IN IN IN OUT IN
SPEAKERS
FRONT
A R
IN
IR
OUT
IN
CON-
TROL
OUT
REC
R L
AUDIO IN
CD-R, MD, DAT, etc.
Note
1 • Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• With WMA9 Pro, sound problems may occur depending on your computer system. Note that WMA9 Pro 96 kHz
sources will be downsampled to 48 kHz.
OPTICAL
S
ASSIGNABLE
2 IN (TV/SAT) 1 IN ( DVR ) 2
FRONT CENTER SURROUND
PRE OUT
SUBWOOFER
SUBWOOFER
MULTI CH IN
L CENTER R SURROUND L R
OPTICAL COAXIAL
ANALOG
R L
AUDIO OUT
DIGITAL OUT
Select one
• If your turntable has line-level outputs (i.e.,
it has a built-in phono pre-amp), connect it
to the CD inputs instead.
• If you're connecting a recorder, connect
the analog audio outputs to the analog
audio inputs on the recorder.

About the WMA9 Pro decoder

This unit has an on-board Windows Media™
1
Audio 9 Professional
it is possible to playback WMA9 Pro-encoded
audio using HDMI, coaxial or optical digital
connection when connected to a WMA9 Pro-
compatible player. However, the connected
DVD player, set-top box, etc. must be able to
output WMA9 Pro format audio signals
through a coaxial or optical digital output.
(WMA9 Pro) decoder, so
03
29
En