Product service centres .............2 Remote control backlight ............10 FCC Notice* ................3 Fitting batteries to the remote control ........10 WELCOME TO THE WORLD OF CYRUS ........4 Sending commands to Cyrus components ......10 Preparations for Installation ............4 Switching on Cyrus source components ........10 Cyrus remote commands ............10...
Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. Cyrus 40 AMP User Instructions...
Product service centres For product service or technical advice, contact only authorised Cyrus service centres. Contact details for Cyrus distributors may be found on the Cyrus website at www.cyrusaudio.com. Cyrus 40 AMP User Instructions...
• Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. *115V products Cyrus 40 AMP User Instructions...
• 2 Loudspeaker Plugs and respected manufacturers of hi-fi equipment. • Quick-Start guide Now is a good time to register your new Cyrus product. After removing these items, please retain the packaging. To register, click here...
USB audio driver. This is available for download from the an external phono stage will be required, connected to an Cyrus website. mac OS computers do not require driver analogue input). The turntable will have a cable with two installation.
Never terminate the cables with separate 4mm/banana plugs. Connecting headphones NOTE: Additional plug kits are available from Cyrus if • Connect headphones to the 3.5mm stereo jack socket required. on the front panel. • Following the instructions supplied with the speaker If your headphones have a larger, 6.35mm (1/4”)
In regular use mains power can be left connected USB audio driver. This is available for download from the permanently. Cyrus website. Mac OS computers do not require driver installation. When unattended for a long period (holidays etc) mains power should be disconnected.
Warning: Excessive sound pressure from earphones and headphones can cause hearing loss. Playing through a second amplifier If you have a second amplifier connected to fixed out, the Cyrus 40 AMP User Instructions...
Switching on Cyrus source components • Press the CD key to switch on a Cyrus CD player and send commands to the CD player and an amplifier. • Press the ST key to switch on a Cyrus audio streamer and send commands to the streamer and an amplifier.
Auto OTA Upgrade Check Install Upgrade No (default) Clear Supressed Upgrade Enabled Time Zone Yes (default) (Set Time Zone) Cyrus Devices Cyrus Device Link Device Group No Device Link Unlinked (set device for input) Group A Balance Group B (set balance)
New firmware versions will be available from the ‘Support’ Low and equal levels of pre- and post-ringing. No phase pages of the Cyrus website www.cyrusaudio.com. shift but can introduce high frequency aliasing at a higher If new firmware is available, this will be packaged with level than linear phase, fast roll off.
The batteries may be flat. Check the batteries. If a fault condition still remains, return the amplifier to Remote control lights flash your Cyrus appointed retailer or an authorised Service This indicates that the Replace the batteries. Centre. batteries are flat.
Size (HxWxD) ... 88 x 220 x 385 mm (3.46” x 8.66” x 15.16”) Weight ............8.5kg (18.7lbs) Material ........Anodised aluminium chassis Cyrus reserves the right to change all specifications without notice. E &OE Acknowledgements This product uses the LVGL graphics library.
Page 17
www.cyrusaudio.com/products/40AMP support@cyrusaudio.com version 1.0 www.cyrusaudio.com...
Need help?
Do you have a question about the 40 Series and is the answer not in the manual?
Questions and answers