DCS PHFS-DW-SS, PHFS-DW-BK, PHFS-DWWT, PHFS-DW-BL, PHFS-DW-GN, PHFS-DW-BZ Use And Care Manual page 12

Assembly Inst ructions
STEP 9
Locate the cap nuts, washers (4 ea.) and
reflector shield.Tip the heater backwards and
support it with stable horizontal surface (i.e.
sawhorse, workbench step ladder).
Install the reflector shield with the cap nuts
and washers.
Use caution not to over-tighten
or damage the reflector. Return the unit to
its upright position and continue to the next
section for recommended locations and
usage.
HARDWARE USED
1) P/N 15005-15 Washers - Flat (4)
2) P/N 15019-07 1/4 Cap Acorn Nuts (4)
3) P/N 15005-10 Washers - Split (4)
FIG.11
FIG.10
SPLIT WASHER
FLAT WASHER
11
ACORN NUT
REFLECTOR
BURNER HEAD