Mounting Brackets - Banner TL70 Pro Modbus Modular Tower Light Instruction Manual

Accessories

Mounting Brackets

All measurements are listed in millimeters, unless noted otherwise.
SMB30A
• Right-angle bracket with curved slot for versatile orientation
• Clearance for M6 (¼ in) hardware
• Mounting hole for 30 mm sensor
• 12-gauge stainless steel
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 × 6.3, C=ø 30.5
SMB30MM
• 12-gauge stainless steel bracket with curved mounting slots for versatile
orientation
• Clearance for M6 (¼ in) hardware
• Mounting hole for 30 mm sensor
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 × 7, B = ø 6.4, C = ø 30.1
SMBAMS30P
• Flat SMBAMS series bracket
• 30 mm hole for mounting sensors
• Articulation slots for 90°+ rotation
• 12-gauge 300 series stainless steel
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 × 7.0, B=ø 6.5, C=ø 31.0
SSA-MBK-EEC1
• Single 30 mm hole
• 8 gauge steel, black finish (powder coat)
• Front surface for customer-applied labels
Hole size: A = ø 7 , B = ø 30
LMBE12RA35
• Direct mounting of stand-off pipe, with common bracket type
• Zinc-plated steel
• 1/2-14 NPSM nut
• Mounting distance from the wall to the center of the 1/2-14 NPSM nut is 35 mm
Hole center spacing: 20.0
July 03, 2024
© Banner Engineering Corp. All rights reserved.
TL70 Pro Modbus Modular Tower Light Instruction Manual
45
61
69
70
57
A
45
93
85
80
A
55
35
2X Ø9
C
B
A
57
C
B
C
A
B
60
45
B
38.25
57
page 11