Panasonic Panafax UF-7000 Operating Instructions Manual page 35

Panasonic uf-7000: operating instruction
Hide thumbs Also See for Panafax UF-7000:
Table of Contents

Advertisement

2
Selecting the desired Transmission setting. (See page 9)
Your machine can temporarily change the File Type and File
Name by using
FUNCTION
Name). You can select TIFF or PDF File Type and then change
the File Name. When sending to:
Internet Fax : select "TIFF".
PC
: select "TIFF" or "PDF".
4
You can send the same document(s) to multiple stations.
Multiple stations can be selected by any combination of
the Steps 3a, 3b or 3c, and then press
The document(s) is stored into memory with a file number.
Then starts sending the document(s).
To Use One-Touch
If two stations are registered
onto same One-Touch Key.
Lower Indicator
4. If the transmission cannot be completed for any reason, the email may return undelivered;
NOTE
otherwise no reply will be printed.
5. For the machine to perform the email address completion the Fax Parameter No. 160 (Default
Domain) must be set to "Valid" and the Default Domain must be preprogrammed in the User
(Internet) Parameters. (See page 87)
6. The "QUICK MEMORY TRANSMISSION" feature is disabled if multiple stations are set.
7. Direct Transmission is not available for LAN communication.
8. You can search for another name starting with the same character by scrolling with the Cursor
Keys (
(XMT File Type and
8 6
.
SET
START
Lower Indicator turns OFF.
<13 > SALES 01
sales@panasonic.co
Lower Indicator is lit.
<13 > SALES 02
pana@panasonic.com
/
).
3a
Quick Name Search Email Addressing
or
3b
(
One-Touch/ABBR. Email Addressing)
and/or
3c
Directory Search Email Addressing
LINK_P35
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Panafax uf-8000

Table of Contents