Panasonic Panafax UF-7000 Operating Instructions Manual page 21

To install your machine as a POP3 Client, the following network parameters need to be programmed on your network.
• TCP/IP Address of your machine
• TCP/IP Subnet Mask of your machine
• TCP/IP Address of the Default Gateway
• TCP/IP Address of the DNS Server (if not available, see note 2)
• Email Address of your machine (see note 1)
• Name or IP Address of the Default SMTP Mail Server
• POP Server Name or IP Address
• POP User Account Name
• POP Password
Email Transmission (from your machine to a PC)
ipfaxuser@fax01.panasonic.com
Email Reception (from a PC to your machine)
ipfaxuser@fax01.panasonic.com
NOTE
3. The email address format can be the same as your regular email address. If your email
address is popuser001@panasonic.com, your machine's email address can be
Internet_Fax@panasonic.com.
Gateway (Router)
popuser001@panasonic.com
Gateway (Router)
popuser001@panasonic.com
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
SMTP
POP3
(POP Server)
SMTP01.panasonic.com
(SMTP Mail Server)
POP02.panasonic.com
SMTP
POP3 (POP Server)
21