Panasonic Panafax UF-7000 Operating Instructions Manual page 29

Parameter
22* LDAP Server IP
23* LDAP Login Name
24* LDAP Password
25* LDAP Search Base
26 HOST NAME
27 Default Subject
28 Default Domain
29-38 Selectable Domains
(01) ~ (10)
39 Remote Password
40 Relay XMT Password
41 Manager's Email
Address
42-51 Relay Domain
(01) ~ (10)
52
Community Name (1)
53
Community Name (2)
54 Device Name
55
Device Location
* Contact your Network Administrator for this information.
END_P29
IP Address of the LDAP Server. (Available when DNS setting is "OFF" on the Fax
Parameter No. 161)(Available for some countries only.)
Login Name assigned to your machine. (Up to 40 characters, Ex: username)
(Available for some countries only.)
Password assigned to your machine. (Up to 10 characters, Ex: password)
(Available for some countries only.)
ID for starting the search in the directory on the LDAP Server. (Up to 60 characters,
Ex: cn=users, dc=company, dc=com)
(Available for some countries only.)
The Name of the DNS Server.
The default information to be added to the Subject Line for all outgoing Email (up to
40 characters).
When the outgoing email address is incomplete by SMTP standards, the Frequently
Sent Domain specified here will be automatically added to the email address. This
feature is also useful as a shortcut when manually entering email addresses to a
frequently used Domain. (Up to 50 characters)
Enter up to 10 Domain Names that can be selected using the "\/ or /\" key during
Manual email addressing. (Up to 30 characters)
This is a security password that allows Remote Programming of the Internet
Parameters and Auto Dialer or the retrieval of the Journal via an Email. (Up to 10
characters)
A password that provides Network security for your Relay Station (used exclusively
for G3 relay purposes). (Up to 10 characters)
Department Manager's Email Address for notification of all Internet relayed
transmissions for supervision and cost control purposes. (Up to 60 characters)
Enter up to 10 Domain Names that have been authorized to access your machine for
Relayed Transmission Request. (Up to 30 characters)
Relay Domain, a.k.a. Domain Name in your machine.
Selects whether to change the Community Name(1) SNMP.
Enables read only.
Selects whether to change the Community Name(2) SNMP.
Enables read/write.
Inputs the device name when required.
(For Status Monitor/EtherTalk Machine Name)
Inputs the device name when required.
(For Status Monitor)
Comments
29