Jabra Pro 92 Series How To Connect

How to connect with alcatel ip touch 4028, 4038, 4068

Hide thumbs Also See for Pro 92 Series:

Download this manual

Jabra Pro 920 Mono

How to connect my Jabra Pro 92x with Alcatel IP Touch 4028,

4038, 4068

Prerequisite:

Jabra Pro 92x + Jabra 14201-36 cable

In combination with one of the following phones:

IP Touch 4028

IP Touch 4038

IP Touch 4068

Connection:

2-sided end:

Insert the RJ45 plug (red band) into the red socket marked with "AUX"

and the RJ10 plug (blue band) into the blue base socket of the Jabra Pro

92x marked with a "phone" symbol.

2-fold Y-coupling end:

Insert the 3.5 mm audio jack into the headset interface and the RJ12

plug into the bell socket of the phone. The extra connector socket on the

Y-coupling remains free for connection to an IP phone!

Now you can setup the headset for your phone with the automatic or

manual configuration.

https://www.jabraheadsets.ch/supportpages/jabra-pro-920/920-25-508-

101/faq/c030b786-24aa-4d6f-90ab-fddf39d431fb

03/10/2024 19:14

Seite 1 von 4

Need help?

Do you have a question about the Pro 92 Series and is the answer not in the manual?

Page 1 Connection: 2-sided end: Insert the RJ45 plug (red band) into the red socket marked with "AUX" and the RJ10 plug (blue band) into the blue base socket of the Jabra Pro 92x marked with a “phone” symbol. 2-fold Y-coupling end: Insert the 3.5 mm audio jack into the headset interface and the RJ12...
Page 2 EHS mode should be set up. If the automatic configuration did not work, please select the MSH mode manually. (See manual). Base setup: Set the phone setup switch to position "A". Microphone volume setting: https://www.jabraheadsets.ch/supportpages/jabra-pro-920/920-25-508- Seite 2 von 4 101/faq/c030b786-24aa-4d6f-90ab-fddf39d431fb...
Page 3 Important: The dial tone signal in the headset is only transmitted if one of the following ringtones is used, e.g. Standard/ Classic / Cold River / Dooing-Dooing. > Menu> Settings> Dial Tone > Internal / External https://www.jabraheadsets.ch/supportpages/jabra-pro-920/920-25-508- Seite 3 von 4 101/faq/c030b786-24aa-4d6f-90ab-fddf39d431fb...
Page 4 Dial the phone number > "Forward" will now appear in the phone display > now press on to the appropriate function key next to the phone display > thereafter you must end the call with the button marked "Handset". https://www.jabraheadsets.ch/supportpages/jabra-pro-920/920-25-508- Seite 4 von 4 101/faq/c030b786-24aa-4d6f-90ab-fddf39d431fb...

Pro 920 mono